Recent content by Peter Marshall

When you first start programming your pyronix enforcer alarm, it can be confusing, especially when you want to have several zones. I followed the brief advice and succeeded. Giving detailed explanation in writing is difficult. If the above suggestions are not sufficient, I suggest you look at...

Thanks, how?

It worked on the internal sounder in the panel, thanks. Any idea how to do the same with the external sounder (siren)? Atm the siren remains silent.

Is it possible to trigger the alarm remotely via app?

It worked on the internal sounder in the panel, thanks. Any idea how to do the same with the external sounder (siren)? Atm the siren remains silent.

Pyronix enforcer V11, is it possible to install a door contact on a door to make a low noise sound on the panel and external siren, every time the door is opened and closed, regardless of the main zone been armed or disarmed.

On dns.

Hi everyone I have a DS-7608NI-K2/8P NVR. I used to be able to view the cameras on my mobile remotely. To reduce the battery usage, I turned off some of the apps. That totally stopped the camera view on my mobile. I turned on the apps that I remembered but perhaps not all of them but it did not...

It worked, thank you.

Hi everyone It should be possible to use 1 and 7 keys together or the top right key to trigger an alarm, in the programming manual referred to as Hold UP (HU). When I press mine for a few seconds, I hear only a faint beep. I have managed to program the two buttons I and II together on keyfob...

Thanks guys. I made the changes that you both suggested and it worked. 5 star.

Under SYSTEM OPTIONS I have Site Options System displays Exit Modes I do not have level set.

I tried it but it doesn't work.

Hi everyone I am new to this forum. I have edited my post to make it clearer (hopefully). Any help is appreciated. I have a Pyronix Enforcer with; 2 PIRs set to Intruder [6] 1 magnetic contact for front door set to Final Exit [7] All 3 allocated to area A. I have added (or trying to add) a...

Hi everyone I am new to this forum. I posted a question and had no idea it was a private message. Hopefully, this is public? If it is still private, please let me know. I have added a MC1MINI-WE magnetic contact for shed to the Enforcer. I have added it to area B and set it to Intruder [6]...