Recent content by Phil-De-Fridge

Might be of some use :) Phil

While not a heating expert by far, I fitted one of these in the past for a friend and while you're correct the literature says it can be installed in horizontal pipework, everything else relates to the actual filter assembly being fitted in the vertical. Q. Can I fit MagnaClean Professional...

Looks like the LAE 153s were fitted with an NTC 10K resistance probe, you could confirm this by using the table for this resistor/temperature probe as below: The probe fitted to this controller is the 10k NTC type (LAE SN4K15P1, Part number 00-556187) with red letter identification. LAE NTC10K...

Might be worth giving this guy a call as he seems to sock parts on Ebay. Winson sales Barry Winson 159, WELLINGTON ST - 0794 0090091 LONG EATON Nottinghamshire ng104jq United Kingdom Kind regards Phil

Checking on some other forums this might do the job as it appears lots of people have been using them for Xmas lights. https://www.argos.co.uk/product/9094653 Argos £19.99, convenient for local pickup if that's best for you or slightly cheaper at Amazon @ £16.99 with free delivery if you have...

How are you cameras powered? By the looks of the info supplied by Reolink, it appears that they're assuming the cameras are powered by the NVR via the Ethernet connection. If that's the case then you will need an un-managed POE Ethernet Switch. Kind regards Phil

Hi, Thanks for the reply, Ideally tape and jointed only but will get it skimmed if there's a need but I'm "led to believe" this may not be necessary? Kind regards Phil

With no disrespect, are you talking about resistance rather than voltage? We're generally on 230v here in the UK for domestic applications but I doubt that answers your question (Stepped down over the years on most substations from 240v). While I'm not a domestic fridge engineer the principals...

Hi again you helpful folks, As part of my kitchen renovation (don't ask, I wish I'd moved out LoL).... My old ceiling cracked at the joints, even after artexing (by others). Since taking a look, the boards are 9mm and haven't been taped at the joins... all square edge boards been used...

This thread might help you out.. https://www.diynot.com/diy/threads/wiring-hive-smart-thermostat-to-combi-boiler.474423/ Kind regards Phil

Thank you guys, I'll keep an eye on the post in case there are any conflicting replies but I really appreciate the responses. Cheers Phil

Hi Guys, I've only recently found this forum and has to be said, there's some interesting reading still to be done but I have a question I can't find an answer to: I'm redesigning my kitchen and it's pretty small with restrictions for equipment location (doors on 3 of the 4 walls) and would...