Planning on getting quickstep LVT click for my bathroom and will level the floor with some ply, but do I need underlay for this and can I get away with some generic foam 1mm rather than the propretary stuff they sell?
Also, it should be okay to put a toilet on top of this flooring yes?
Okay so I can use the mac-3 cast iron connector along with this? https://www.screwfix.com/p/mcalpine-wc-f26r-flexible-wc-pan-connector-white-97-107mm/71219
cast iron connector goes inside soil pipe, then flexi wc connector connects this to the toilet itself?
should mention the WC outlet and...
https://www.ebay.co.uk/itm/MAC-3-Cast-Iron-Pan-Connector-WC-Connector-for-Cast-Inside-Diameter-approx-80mm-/251336366230?
Looking at this connector again it seems that it might not work on my soil pipe as it's wider than the 110mm WC connector I have at the moment.
Thanks, so would the first connector linked be sufficient to use with a toilet connector or would I need the second also? or is the second what a plumber would use to connect to a pvc pipe?
Also is there anything I could use to conceal the soil pipe without getting a joiner to make some kind of...
I'm looking to replace my toilet in my 1970's build flat but I think I'll have a serious issue with the way the toilet is currently set up.
I have a very old very disgusting cast iron soil pipe coming through the floor by around 3-4 inches which is connected to my toilet via a plastic...
The buzzer is now working, and I believe for the socket what has happened is the dust from when he tore down part of my ceiling as gotten behind the tile the socket is embedded in and interfered with the electrics. Or perhaps the dust and debris have gotten in to the socket itself? I'll need to...
I had a plasterer in to redo two of my ceilings in the kitchen and bathroom. Now that the work has been completed a socket in my kitchen and my front door buzzer (I live in a block of flats) no longer work.
Is this moisture related? Problem is things should have dried by now as the plastering...
Okay, I've had a go and I can't get the screw in the pic to screw in any further leaving too much space between the screw head and the point of contact therefore the ring terminal does not fasten in tightly. I think this is because the screw is hitting the upper part of the conduit and there is...