Recent content by purplew1zard

I have fixed the pressure and the leak using just your help. I am very grateful to all who chipped in. I hope you all do well in whatever business you are involved in. As I am just starting of as a lawyer, I would be happy to exchange tipsof the trade one day. All the best and thanks...

assistance please

Hello, I had F.28 displayed. My manual says it means I need to fire up the boiler again. I have tried doing this but since using the depressurising valve knob, (the big grey one) I have lost so much water in the tank that it refuses to ignite again. I still have not guessed how to refil...

I have tried a combination of ways bu the water is not flowing. Do I need to do anything else to trigger a flow? I now have the display with a red light lit saying "F.28"

Hi Slugbaby, Thanks very much for your help. I have found the two screws. You were right about the valve on the brass component. I have opened both. The pressure gauge is not changing and I can't hear any flow of water through the filling loop. I have tried with the boiler on and off...

Please. I just need to know how to bring the pressure up from 0 to 1.5. I have located the filing loop and one of the screws on it. I am told I need to open another screw until the pressure goes up. Please could you tell me where this is? John

How did you get the pressure bac up again....its all I need to know before I can start my weekend. Pls assist???? Thanks John

Chris R: Hi, The nut I refer to is on the pipe below the grey knob which I turned and made a clunk. It appears to have de-pressurized the tank (the grey knob). By tightening the nut I have stopped the water which was leaking from the pipe joint. The only issue left is the pressure. I...

-------------------------------------------------------------------------------- Hello, Urgently required advice. Hava a Valiant boiler on which the pressure gauge has dropped from 1.5 to 0 and a leak all down the back of my house from a pipe exiting the boiler from inside thehouse...

Hi I have used the grey knob as desrcibed. This made a clunk and there is no more water leaking from the back of the house. NO I have also found the screw on the silver hose. I have unscrewed it completely and nothing happens. The pressure is at 0 since I used the grey knob. What else do I...

there is a cross shaped screw under the boiler by the silver flexible hose. DO i need to tighten or loosen it? Can I do it at any time or does the boiler / water have to be on/off? PS: I have the instructions but they make no reference to the fillng hose so I am not sure if they are complete...

Hello, Urgently required advice. Hava a Valiant boiler on which the pressure gauge has dropped from 1.5 to 0 and a leak all down the back of my house from a pipe exiting the boiler from inside thehouse to outside through the wall. Have read posts about doing something with the filling...