Recent content by racket

Sense up ? whats this, is it a setting that I can change on the NVR ? I'm still going to try a power supply so can you recommend one ? Cheers

Hi, I'm getting ghosting images at night. If somebody walks past they look partly invisible and I read somewhere that connecting a separate power supply would sort this, also why is there a power socket at the camera ? Cheers

Hi I have the swann NHD-885MSB cameras and I want to install the additional power supply for better night vision. can somebody tell me the voltage required and the pin size or better still recommend a power supply that will do the job. many thanks

No I left all the settings the same

When the blue light comes on I,m led to believe that’s a trigger of the sensor. I’ll turn the microwave up and check again. I,m not back at the property till next week so I,ll update you next week. Cheers

Hi, Pirs are Pyronix (DT) KX15DT. Cheers

Yes it is a new install, option 21 is default closed circuit but yes I will have to double check that. I was doing the walk test in customer mode, is there a difference to engineering mode?. Yes I can leave engineer mode and the system will set in A ok. The passives do activate but not first...

Hi sparky marka, yes I,ve checked and all the zones are programmed to A,B,C,D and there will be no night settings.my question is why are the passives not sounding at the keypad when I do a walk test, they only sound after they have been triggered after a couple of times, also the door shock...

Europlex you need to take a chill pill mate. The manual is a bit hard to work out hence why I,m asking the experts to tell me in plain English, if you don’t want to help then don’t reply to a post.

Hi, Not sure about the A,B, C, D is that the attributes for each zone? Zone 1 is entry and exit zones 2 and 3 are dual pir and 4 is a shock sensor on the back doors. I don’t need an access route on any pir they set the alarm and leave. Can you tell me what I need to program the zones as and the...

Google just brings up the manuals. I’ve set them up now but i’m Having trouble with the walk test, zone 1 door open sounds ok but the passive don’t sound first time, I have to get them to trigger a few times before I hear the tone from the keypad and the shock sensor on zone 4 won’t sound at...

Hi, Can anybody tell me the default zone and attribute settings for all 8 zones in the panel ? Cheers Chris

No its not a paper border its painted onto the wall.

Hi, I have a cream coloured room with a blue painted border running around the walls and I need to get rid of the blue border. Can somebody tell me the best way of doing it? do I just keep painting over it with the new cream colour untill it disapears or is there a better way of doing it...

Cheers for that, I'll give it a go tonight.