Recent content by Random446

Trued unscrewing but it appears to be fixed on to the metal base, the pull string goes between the metal prong that sticks out so there’s just a small hole where the pull string would have gone into so no switch other than that,

I have a lamp where the pull string has broken off and there is no existing thread left to re attach to, see photo, the unit the bulb goes into seems to be sealed by a metal surround I was wondering if there is anyway to at least get the lamp to be in the on position so that even if the pull...

My washing machine was slow to fill and needed a new valve, the engineer said the old one was clogged with sediment and if not resolved the replacement valve will eventually clog again, despite a filter on the fill hose. What is strange is the cold tap water feeds off the same pipe and is not...

I had a problem with my washing machine which required a new valve and the engineer repairing it showed me some brown gritty sediment which he said was coming from my water softener which is relatively new. I’m trying to work out what the issue might be as there is no obvious sediment in...

I have replaced a cartridge on a grohe tap but the tap is still leaking water at the top. I have done this job in the past with no issues and have just slotted the new cartridge in. I am wondering therefore if the part below should also be replaced as I think there is an O ring underneath it and...