Recent content by Reddwarf4ever

Magnetic scale inhibitor, fitted to my new build last year, after lots of discussion the manufacturer says replace after 8-10 years don't know why it's not a catcher but an inhibitor. Thanks

Just ordered both items as you described from Screwfix, thanks for your help

Thought the minimum height was to be above the washing machine drum water level to prevent Syphoning Thanks

Looks good, what height should I cut the T piece into, believe there's a minimum height from the ground thank you

Why can't I use the spigot into the standpipe us there any technical or legal reason why I can't do that

Initially I thought a standpipe adapter that takes two waste pipes would be the answer, but I now think it may be best to add a nozzle to the standpipe for the washing machine and insert the dryer drain out hose into the top of the standpipe, the top of the U trap is 11" from the ground, if I...

I removed the door, cleaned up surfaces with surgical spirit and used epoxy resin, so far so good.....the glued part doesn't get hot only warm si should be ok

That's what I thought might need to glue it back

The video was no help for my problem the vertical and horizontal part if the door on the oven side have separated, can't see how to get it back together Have to be very careful opening and closing door as the door assembly just slides and the glass falls out

Bush AG56TB door fallen off Tried for hours to get the door back on, can get the inner glass label in, but it's not secure and keeps falling out again Need some help how to refit this

Just saw your old post re a Vailant 418, I have a 418 eco tec plus installed 2009, have had some problems, still two remaining , changed the pump to a DAB Evosta 3, really quiet now amd running well, but was. Along story to get to the stage i am at, with lots of help on another forum. So did you...

Hi Just saw your old post re a Vailant 418, I have a 418 eco tec plus installed 2009, have had some problems, still two remaining , changed the pump to a DAB Evosta 3, really quiet now amd running well, but was. Along story to get to the stage i am at, with lots of help on another forum. So did...

Would really appreciate it if Alex, or someone else with a good working knowledge of Vailant boilers could assist me thanks

Ok, so are there any boiler settings to reduce the over firing at start up ? It modulated ok once stable....also what can I do about the cut out when flow temperature is 3oC above target, even Vaillant say should be 5oC.... Circulation is fine.....just installed a new DAB 3 evosta pump & its...