Recent content by Rexion

  1. R

    Anyone Recomend Plywood Glue?

    Anyone know of a UK adheasive which is suitable to glue down 6mm plywood to a an ASPHALT floor prior to laying a sheet vinyl floorcovering? {would a floor tile adheasive work with a few screws round the perimiter?}
  2. R

    Smoothing over Ashpalt Sub- Floors?

    Hi! Mattysupra, Thanks for your response highlighting the drawbacks of plying over asphalt, I now have a much clearer view of the situation than I ever did before. Cheers! laser
  3. R

    Smoothing over Ashpalt Sub- Floors?

    Hi! Mattysupra, Thanks for your response. My asphalt sub floor is in without cracks, but not level and when I removed old vinyl floor tiles there is some minor surface damage. I had intended to overlay with plywood as it`s inexpensive at around £50., by comparison to leveling compound. But...
  4. R

    Smoothing over Ashpalt Sub- Floors?

    If I overlay an ashpalt sub-floor in my kitchen with 6mm plywood drilled and pluged at 300mm centres {100 x 1" screws per 8`x 4` sheeet of plywood am I creating future problems - Will screws `pop` out due to foot traffic? Will plywood warp and twist? Will drilling ashalpt cause damp...
  5. R

    BRUSH MARKS - SATIN QUICK DRY.

    All responces to the post greatly appreciated {keep them coming}, great to hear from Pro-Decorators and there view. Anyone tryed WICKS DIY own brand SATIN QUICK DRY OR EGGSHELL? Also, does the dilution of paint by water or thinners result in a`lack luster finish`. And what in general do the...
  6. R

    BRUSH MARKS - SATIN QUICK DRY.

    I have had problems with regard to SATIN FINISH QUICK DRY PAINT - I found it drags, not flowing , difficult to work and hard to`feather off. Contacted paint manufacturer and was advised to add 5% water which helped a little. Would any pro-decorators care to advise .{attended an 8wk...
Back
Top