Hi
We moved into our house over a year ago. The front door has an external light. It does not have a sensor, and is not live (I checked with an electrical (tester) screwdriver). We cannot find the switch to it anywhere in the house. The wiring was done probably around 30 years ago.
Is...
Thanks Eric,
I did have a go at cleaning it with WD40 but that did not do the trick. I then thought that it might be the base (where the connection is) that is the problem area. I therefore taped that up and it is now all sorted.
I used regular sellotape instead of electrical tape because...
Hi
Simple question really, I think.
The CH/water system works fine. It just seems to need a lot of pressure to get hot water out of the taps. If you reduce to a reasonable flow the water goes cold.
I assume it's the flow switch. I am wondering if it's something that can be adjusted or...
Thanks for the advice. That does make sense!
The electrical cleaning spray you speak of, can I use WD40 or do I need to buy a special one? Do you have any idea how much it should cost and where I can get it?
Hi all,
I have a range cooker. The Wok burner's electrode stopped sparking (died out over a period, then completely stopped.
I got a new one and replaced it. It will spark fine when being held (by hand) next to the metal plate that covers the gas outlet. (I say "next to", i mean about...
Hello all,
First I would like to apologise if during this explanation I use the wrong names for the heating parts, labels are not included with the equipment.
I have a Danfoss CP15 programmer which I recently attempted to use on the 5/2 setting rather than the 24/hr setting. To do that I...