Recent content by rizanx01

HI, has anyone any more thoughts on this?

Thanks RandomGrinch, never thought of that. Definitely an adoption and as you say an easier build. Cheers.

We have a room with a stone archway and I want to create a partition in the archway with a door to create a separate room. We are using this as a cinema room so need to add some soundproofing. I have thought of a couple of solutions, 1. Hang some sliding doors - these would be big with not a...

Thanks everyone for the advice here - havn't had time to get anything to descale the HE but have removed and thoroughly flushed it through with water lots of stuff came out, and with flushing for about 10 mins and some gentle tapping manged to remove lots of black scale - hot water restored and...

Thanks gasman - perfect response, understand totally now what to do. Got the manual and it looks straightforward but great advice. Thanks all - I will let you know how I get on

Thanks - would you add anything to the sytem afterwards, new houses etc so no idea if there is inhibitor etc in the sytem - what do you recommend. Cheers

Thanks Ianmcd - I wondered if I needed to order them. Just in terms of the diagnosis - when I call for hot water the boiler pressure increases slightly - is that normal?

Hi can anyone give me a basic step by step instruction on replacing the plate heat exchanger. The fault is hot water running hot then cold and hot again with the boiler cycling on and off. DHW fine. All the research I have done points to this being sludged up. Have seen the part for around £50...

Hi - I have the same issue - read somewhere that it could be the plate heat exchanger needs flushing/cleaning? Wondered if you have solved your problem or if anyone knows how to diagnose if it is the plate heat exchanger?