Recent content by russy47

Damn seems this wasn't the problem. 3 cycles and back to 11 flashes. Read somewhere else that error code FA (11 flashes) is to do with a n optical sensor that isn't on this model. Only advice was about taking off left panel and looking at the diaphragm?? Posted a new thread with images if anyone...

Hi there, So I tried the pressure sensor fix from another old thread for the 11 flashes (error code FA). It worked again for 3 cycles but now back to 11 flashes. My sensor was clean anyway, so wasn't 100% it was that. I read somewhere else that as this model doesn't have an optical sensor...

I had this typed out then lost it all after trying to add photos argh! I'll keep this short. Thanks all who posted step by steps. I know thread is old, but dishwashers last a while! My pressure sensor really wasnt clogged up much. Just a bit of grime and calcium build up. Removed with...

Ha is it that obvious! Your damn right I haven't got the experience but I'm very interested in possible solutions andclike to know what I'm talking about if I need to get someone to do the job. But yes your right I'll be filling any gaps which I'm happy to do on my tod. And may end up...

Ok got you now... yes i think there are gaps around the joists in many cases. So these hangers... can they actually handle the weight and do the same job as the joist suspended on solid wall?! I can just imagine the metal bending over time??

Hi Deluks, The noise (sound as if) comes through the adjoining walls. Mainly voice noise and footsteps on hardfloors. Cant be specific ie low frequency. But I know that part of this is coming through the floor and joists due to the increased volume in the cellar. Excuse my ignorance but...

Nope dont have enough to run both. main shower becomes a trickle and loses temperature when cold water tap on

Hi, My property is 1920's Town/terrace era. The walls are solid brick and the joists run through into adjoining properties. This can be seen in my cellar and also heard! Sound from next door both ways is clearer in the cellar along the joists. Im wondering if there is a way to plug or cut...

Hi there, Im going to be fitting a new second bathroom. My main concern is that this second bathroom is there for having a second shower available. Both my main shower and this second shower will be in use at the same time and my water pressure wont be good enough running from my combi...

You wont believe this. Its bust again! Thanks for the advice last ime btw. 2 years ago replaced the pump. worked fine. This time its not draining again. But pump sounds like its working. With the filter cap off i can see the impeller blade spinning. Cleaned main pump outlet line but not...

Hi there I have a Bosch wfl2000 washing machine. It has stopped draining but the pump still works. I have removed the pump filter and noticed that each time its trying to drain the impeller is spinning loose of its axel. Any ideas anyone on how to fix or is this just a new pump unit job...