Hi
I have changed some halogen MR16 pin downlight sockets to GU10 sockets, changed the dimmer to trailing edge and replaced the bulbs with dimmable LEDs. Above the shower is a light on the same circuit which has an MR16 socket which I cannot change over due to its design so I have left it as...
Thanks everyone. I did take them out and put the wires back into each little white box and super tightened so when I put them back up, they stayed on this time. I have of course reconnected each earth back together within the loop. The problem is likely the strain of pushing the downlight...
Sorry, to specify. Yes I have taken the transformers out so I am left with 4 wires coming out of the ceiling (2 live, 2 neutral) that come off the loop. They previously went into the in out transformer. I connected them into the little white JB (it is a simple little white box with 4 holes with...
Hi, does anyone know if there is a gadget that can join my loops together? I am changing MR16 downlights to GU10 so there are 4 wires into the transformer and 2 out to the light.
I have squeezed the 2 same colour wires into the same connector and tested. All fine. When I push them back into...