Recent content by Skulduggery

you could try this but its expensive https://www.owatroldirect.co.uk/product/decking-paint/

I'm looking to reinstall a cantilever support where an old porch use to be. The external wall is a rendered cavity block. Whats the best fixings for this? The vertical is 80cm horizontal is 65cm. I was thinking 3 no. Hollo bolts after I screw the 3 pieces together. 2 above the 45deg piece and 1...

The wall is 1750mm high......good point Ian ill leave the bottom horizontal piece off and just leave the top one as it will be higher than the wall

Hi, looking for some help with a fence im putting up against a block wall Its 2.4m long x 2.1m high. Iv ordered 4.8m shiplap as there in 2 walls to be done and 50x35mm for frame. Im guessing i make the frame 2.4x2.1m with 600mm centers and screw that to wall the screw the shiplap planks to...

thanks it is a 3 amp this might be the wiring diagram for it

i did pull the lever on the head for some stupid reason and the trip switch went off and the fuse went on the timer clock

thats the right model yea

the problem is when changing the actuator for the CH i mixed some wires up so when i went down stairs the therosta light was on even you put it at 0 deg so i went over to the timer clock and that light turned but boiler wouldnt fire up. The only ones i could of crossed would be Gr and Bl as...

could be just that should be no mistakes.......have to look for the diagram first cant find it thats why i was posting to get some help cheers should be able to download the diagram?

if i post diagram of the other wires might be easier to understand it?

thanks for the reply not sure why but the HW is wired correctly so just looking how to do the CH one the actuators are Sauter EPH controls

its a condensing boiler im not going rewire the whole lot just the CH wires

Hi, can anyone help me, i tried changing the head off the CH valve as i changed the HW one before and it went fine but i think i f^&*d up this time. Before i changed it i drew were each cable was previously or so i thought. :( everything is working except CH act. and with this setup the...