Recent content by SRRAE

What if I just had it pumping on to the patio and it flows down the drain with the rest of the rain water gathered there?

Im after a pump to help with the drainage of my garden. I have put in a french drain to help flow the water away but due to the orientation of my garden it has little place for the water to go. Im planning of having the water flow into a under ground container and then use a pump to pump...

Thanks for your reply. Any suggestions on how best deal with the gravel?

Hi, Little back story, we moved in to our home about 5 years ago, the previous owners had recently had the back and front garden graveled for "low maintaince" reasons. Sheets/membrane where lay on top of uneven soil and then filled with gravel 5 years on Im getting rid of it and putting...

Hi, Yes its set to Auto and not Man. Yes I do have a frost stat. That makes the usual click sound when I turn the dial from a low temp to a high temp. But that would only activate the heating if the control timer was set to on anyway. I dont know how that would cause the heating to...

Here is an image of what I changed. I changed the white thing at the top (2 port actuator valve ig was described as) and the water pump underneath.

right

Hi thanks for your replies. I replaced both and the water pump as the leak went straight on to electrics of the pump and caused it to short. I am sure I removed the wire one by one and like for like when I wired it back up. The heating timer is displaying correctly and seems to be...

I had to replace the 2 way valve actuator and my water pump. The actuator leaked and then leaked on to the electrics of my pump causing that to blow. Now I have replaced both and I got like for like. I changed one item at a time and replaced the wires of the new item in to the same location...

I found the problem. The panel was plugged in via a normal plug in the garage near the central heating. I replaced the 3A fuse and plugged it in to hear a fizz and pop coming from what I have been told is the 2 way control valve. that is when I noticed some suplur on the the water pump...

I have discovered that the symbol is a battery symbol. Quick search and this means the unit is not getting mains power. Where would I start to look? I have checked the main fuses and they are all fine.

Today we noticed that there was no hot water. When inspecting the controller a Danfoss 102E7 there was a new icon on the screen. If people have seen these there is a black bar bars at the side of the screen which correspond to which mode it's in, On, Off, Auto, All Day. There is another...