Just a quick one if anyone can help. Is there a time period after which size becomes ineffective. I sized my hall,stairs and landing last May but then broke my arm in 3 places and am only now ready to start lining the walls. Do I need to re-size or will I be ok. Wondered if it dried out etc. Any...
Can anybody help me please
I have fitted an internal panelled door into an old frame which is badly out of square. The top hinge I have fitted has gone on ok but on the bottom hinge the screws are spinning. I have redrilled and tried plugs but that hasn't worked. I have moved the hinge upwards...
Bought 6 new internal 6 panelled doors from Wickes. First one went on ok but when I drilled out for the latch on the second one I noticed that the lock block wasn't sitting flush with the face of the door but was recessed in about 10mm. When I chiselled out the recess for the faceplate of the...
I have read in many posts that corners where lining paper meets should be caulked prior to painting. Does this also apply when the lining paper is to be covered with wallpaper.
Any replies appreciated.
I have lined a room but after it had dried have noticed three brown stains that have come through. I think these have been caused because the size was not fully dry in these areas. Could anyone tell me if these are likely to bleed through my top paper. I am planning to use vinyl top paper on the...
Could any one help me with a problem I may encounter in the future. I recently fitted a new bathroom suite but as my floorboards weren't level I laid a 6mm plywood sub-floor under the suite. It has only now occurred to me that were I to have a leak the ply could not be lifted without removing...
Have bought some 1700 grade lining paper to cross line rough walls in my house prior to papering. Have bought Solvite Extra strong paste but not sure what mix I should use for lining paper. They don't state lining paper on the box.I have read that you should use the ready mixed stuff for 1700...