Recent content by Susanne

  1. S

    Whisteling pipes when tap used and/or toilet flushed...

    Thanks - the toilet is not that old (about 3-4 years), does it still need to have the washer replaced? I've been Googling to see how to replace such a washer, and have now worked out how to shut off the water supply, in order to have a good look at the bits in my, thankfully, bright and clean...
  2. S

    Whisteling pipes when tap used and/or toilet flushed...

    I have a problem with noise in our bathroom (worse at night), I have no plumbing knowledge, but will try to describe it as clearly as I can: Typical, terraced London townhouse. We've had the house for 8 years, the following problem is fairly recent. 1) When the toilet is flushed, the...
  3. S

    Miele condenser dryer blowing cold air only

    Thanks Zipper, I'll wait for the meter, sounds like I will be wasting my time otherwise. Cheers
  4. S

    Miele Tumble Dryer (Condensing) Leaking?

    Hi there, I've just taken off my back plate to get to the sensor (to fix the "machine running cold only" problem), and when I took off the plate, the silicone seal broke in two places, ie. 2 small sections of the seal remained attached to the machine, instead of staying on the back plate. I...
  5. S

    Miele condenser dryer blowing cold air only

    Thanks a lot, Zipper, and I'll keep the silicone in mind. I actually managed to get the thermostat out of the machine, wohoo, and realise that the next step is to try to shock it back into action. Which way should I bang it against the floor to reset it, "flat back" down, or two-prongs...
  6. S

    Miele condenser dryer blowing cold air only

    I now got the back plate off, thanks. The silicone seal didn't stay intact, but more on that further down in this mail. Behind the back plate was a heating element, with 2 leads attached. I was just going to locate the thermostat, and bash it like described in the other thread, since I...
  7. Untitled

    Untitled

  8. Untitled

    Untitled

  9. S

    Miele condenser dryer blowing cold air only

    I've now unscrewed all the screws that hold that plate in place on the back of the machine, but the plate won't come off! I've tried unscrewing the top of the machine as well, but as far as I can see when following the wiring when looking down from the top of the machine, I definitely have to...
  10. S

    Miele condenser dryer blowing cold air only

    My Miele T294C condenser is blowing only cold air, and I'm wondering whether it perhaps happened after a power-cut we had. I found this thread: //www.diynot.com/forums/appliances/miele-t4809c-tumble-dryer-not-heating-up.288028/ However, I can't get the back panel off since all the...
  11. S

    Danfoss TRV question

    I am having problems with my radiators, and wonder if it could be due to the kids fiddling with the thermostats: We have thermostats similar to this one,where you can turn the central dial (ie.the one on the front face of the whole TRV unit) as well as turn the unit to the desired number...
  12. S

    Danfoss TRV question

    Course! Thanks.
  13. S

    Danfoss TRV question

    I am having problems with my radiators, and wonder if it could be due to the kids fiddling with the thermostats: We have thermostats similar to this one,where you can turn the central dial (ie.the one on the front face of the whole TRV unit) as well as turn the unit to the desired number...
  14. S

    Small pull switch for bathroom light

    The tiny pull cord switch on my bathroom mirror lights is broken, and the diynot-thread below gave me the link for this, which looks exactly like the thing I need. (Original thread: //www.diynot.com/forums/viewtopic.php?t=87548) However, my mini pull cord switch is...
  15. S

    Indesit cooker hood/extractor fan (hi 160) stopped working

    This is a wild shot in the dark, but these forums are a goldmine, so I thought it was worth a try: My extractor fan, an Indesit HI160, has stopped working, and I wanted to try to see if I can fix it myself, before paying the £125 callout charge. It was not in use when it stopped, it worked...
Back
Top