hi a few weeks ago i got locked out my house it turned out the hook part at the top of my double glazed door had broken, does any one know if i can get spares and if i need a model number,
hi guys i have an audi a4 2.0 tdi sline and when i pot it into reverse i should get a short beep to say the sensors are activated. Now all i get is a high pitch noise and the sensors dont work any ideas
exactly it dont make sense as i would pressume that if i can pour water down it freely when its not connected to the sink then theres no blockage but as soon as i connect it and run the tap for 3-5 sec it wont drain
been to a kitchen sink today that wont drain,the trap is clear and i stuck my metal snake 5 metres down the pipe and its clear,i only have to turn the tap on for 5 seconds and it wont drain any ideas
called to boiler today with no hot water. after fitting new parts to the diverter valve and a newmembrane the boiler fired fine for hot water,but it would only fire for a few minutes for heating and the temp flys up and then boiler off.on feeling the flow pipe there is nothing but the pump is...
hi mate you sent me some advice thanks after speaking to ideal tech they told me it was the gas valve giving me a fault code of fl i found the condense trap blocked solid and the sump full. after cleaning it the boiler worked fine thanks for your help i am registered with gas safe but only been...
just to let you all know thanks for your help but dont listern to ideal tech the fault code fl they say can be a variety of things and when you run though the dc voltages to the gas valve they say its wrong. what the actyal problem was, was the condense trap was blocked solid and the sump full...
showing fault code lf any ideas? boiler goes though sequence first time doesnt light then fan speeds up goes to light fails then locks out on lf any ideas
called to boiler not working when switching on programmer pump runs but fan doesnt and it seems to be fairly stiff so im presuming its knackered any ideas