Hi all,
One day I will post more on here with aswers rather than questions, but hope someoe has come accross this before,
I have taken up the floorboards in our lounge because of woodworm and it being horrendously cold we are goig to put in PIR boards between the joists, 2 part query:
In the...
After the first alert came through on my phone, it hadn't let me know of any more comments. So thought i would log on again.
Thank you for all your responses!
No further progress has been made yet as I was hoping to get some pointers as per above, in my naievety i thought smashing out the pipe...
Good Evening all,
I have started to have a go at replacing a cracked Gully pot, and having exposed the pipework want to take a pause and just double check my next steps are going to be OK.
So, for reference:
This picture shows:
Left hand small pipe - Something dodgily put a drain run that...
Hi,
I have a similar problem, the seals on my door are perished, mainly on the door frame than on the actual door though.
How did yours go in the end?
Cheers
Tom
Good Evening all,
Please could you provide a little assistance with the below problem:
My rear PVC door lets in water (when it rains :D or when I fire the hosepipe at it :? )
We have had this problem for ages, yet as we are getting the floor tiled next week thought I better fix it...
Cheers so far guys. i know the bath isn't the best. this housr was ex-council and weve spent a lot of time putting other things right. this room is the one we overlooked thogh. We would rather not teplace the bath at this point. Is there a workaround for the next few(6) months? Cheers again.
Okey Dokey....
Here is the actual bath
And the Detailing causing the problem
And another pic of the same
And finally is the thing I have seen at my mates house which would or would not fix the situation?
??
Hope this helps or gives a...
Good Afternoon everyone,
I was hoping for a bit of help today, isn't everyone? I have tried searching the forums, the closest thing I have seen is this post here: //www.diynot.com/forums/viewtopic.php?p=546511#546511
Unfortunately I do not have pictures at present but will upload...