Recent content by tony7

Yes, your right, he will, just thought I'd ask the experts here as well. I just had the plumber in a few days ago to disconect the pipes from the back boiler. Its over to me now, when i get the time. Thanks.

Thank you, good to know. Would fire resistant board be the wrong choice then? Its just I know a person that took the job of installing his own stove and I think he is going to use fire resistance boards. Thank you for your advice.

I'm courius to know your opinion, is it fire resistance or heat resistance board thats needed for the sides and back of the opening for the stove? Thanks.

Hi, I will do the work involved myself, I'm a retired joiner and I'll get the stove install with the supplier, he is an HEATAS installer. He is going to keep me right with the preparation. Thanks.

Hi all, I have an existing back boiler open fire in our living room. I was going to remove all and replace it with a multi fuel stove. I have a timber frame house and am wondering what is the best fire boarding to use? Also, what is the best way to finish off in around the two sides and the...

Thanks secureiam, yes, hard wire would be best. I could drill a small hole to get the power to the bell and hope the wifi will be good enough, the router is in the hall, cl.ose to the bell. This is the one i was thinking of...

Hi, I was thinking about buying a Reolink Video Doorbell. https://www.amazon.co.uk/gp/product/B0B4KCSZ2M/ref=ox_sc_act_title_1?smid=ARGDLBF91D6J6&psc=1 or https://www.amazon.co.uk/gp/product/B0B4KBMDD3/ref=sw_img_1?smid=ARGDLBF91D6J6&psc=1 I dont have an excisting doorbell installed BTW. I...

Hi all, thanks for all the advice, I made a soft morter mix after cleaning all the old away, beded the 3 Tegula bricks down again, flush again with the excisting, left it 2 days before walking on and their perfect,its the first time in 30 years that any came loose. Sorted :) Thanks.

Thanks all, That would be the best all right , CT1 mmmight work , OK thank you once again.

Hi, Its for my front door step, The step is made up of the wee Tegula bricks, about 5 inc sq. Three bricks, along the front adge have come loose, the rest are perfect, I thought if I lifted the bricks, give them a good brushing and paint the PVA glue onto both surfaces and stuck them down...

OK ,Thank you for your advice, will do.

Hi, I have vinyl flooring planks about 150mm wide and about 1400 long, (T&G) I just used warm, a little soapy water to wash the floor. The floor isn't dirty, just was looking something to put a wee bit of a shine on it. Thanks.

Hi, I fitted a 4mm vinyl floor in out bathroom about 3 years ago, I'm wonder, is there anything i can apply on it to give it a wee bit of life, its a bit dull looking. I know it can't be a slippy surface, just something to make it look, not as dull :) Thanks in advance.

Lets hope John :) Thanks.

OK, Thanks.