Recent content by troy.mclure

  1. T

    PIR Broken...?

    Yeah it is North facing - is that a problem?
  2. T

    PIR Broken...?

    Hi all. I've got a weird problem with my PIR floodlight. The problem is that the light turns itself on as soon as it turns off, as if the sensor is constantly being tripped. As a test, I went up a ladder and put my hand over the sensor and when I do that the light turns off and stays off. Any...
  3. T

    Pond Electrics Keep Blowing

    Hi Guys, After having my pond electrics run trouble free for over a year I have suddenly developed a strange problem. Not long ago the UVC bulb blew and so I purchased another one to replace it - but that blew almost instantly. This tripped the circuit, but once reset the pump worked fine...
  4. T

    Adding a New Socket

    good old google helped me out with a diagram - now I know what you mean by a ring main and spur - sorry, I've never heard the term 'spur' before and it threw me. Anyway, like I said I dont know yet (I need to check when I get home) whether its a spur or ring, but other sockets have been on the...
  5. T

    Adding a New Socket

    Thanks for the responses guys, but..... rings!?... spurs!? I don't know all the terms I'm afraid, so I'm going to need need words of 2 syllables or less! I'm not sure what the wiring is like leading into / out of the socket because I haven't had it off to take a look yet - I'll check it out...
  6. T

    Adding a New Socket

    Thanks rebuke. So looking at the safe zones - my options are... 1 - Drop the cable and go under the floor then back up to the new point. 2 - Take the cable up to the top of the wall and then around the topof the wall the new point, and drop down to the point from there .... I cant go...
  7. T

    Adding a New Socket

    Hi guys, In one of the bedrooms we have one single socket, and I'm wanting to add another socket to the room. The plan is to turn the single to a double, and then run another socket from this one to another wall in the room. The questions are..... 1 - Am I allowed to do this / what are the...
  8. T

    Air Lock in the System?

    Hi, When trying to refit a radiator, I managed to damage the copper pipe which meant I had to drain the heating system so that I could repair it. After repairing the pipe and turning on the water again to refill the system, some radiators no longer work - im guessing I have introduced an air...
  9. T

    BEST FILLER FOR THE JOB?

    Im using some easifill at the moment to repair some walls before painting - and I've gotta say its good stuff. How important is it to cover with pva first? I was just going to use a watered down coat of paint to prep the wall before painting it the final colour.
  10. T

    Replace Cast Iron Guttering?

    The best quotes I've got are around the £1,400 mark for replacing 2 sides of fascias and soffits, 2 sides of guttering, and 2 lots of downpipes... some of the quotes have been over £2,000. To be honest this is more than I was expecting, but seeing as loads of different people are all coming in...
  11. T

    Replace Cast Iron Guttering?

    Thanks for the info guys. Sounds like the guy who told me to leave the cast guttering just didn't fancy replacing it! Shame, it means forking out over 1400 for the lot - but if you want the job done properly.....
  12. T

    Replace Cast Iron Guttering?

    Everyone else on the terrace has the same, so I'm assuming its original to the house - which is a 1930s build, so the guttering isn't young!
  13. T

    Replace Cast Iron Guttering?

    Hi, Now that the weather has taken a turn for the worse I have noticed that my guttering is leaking into the wooden facias/soffits and causing damp in the walls behind (and probably rotting the wood). So I've decided to have the fascias, soffits and guttering replaced with uPVC. I've had a...
  14. T

    Building a Shed Base

    Hi All, I'm wanting to get a new shed in the next few weeks and the supplier says I need to have a 'good base' ready for delivery...... but what makes for a good base? I was planning on just laying out a few broken up pieces of paving slab on some compacted ground, and then laying bearers...
  15. T

    concrete fence posts

    I put a 6ft fence up not so long ago, and put all the posts up first. Then put in concrete gravel boards and fence panels afterwards. Although it's possible, you need to be very accurate with your measurements, and lifting gravel boards 6ft in the air is amazingly difficult!!! I'm...
Back
Top