Recent content by tzartisan

Hi all I want a compressor and soda blaster just for occasional use so don't want to don't want to spend much. This compressor seems a bargain http://www.sgs-engineering.com/sc24h-24-litre-high-flow-air-compressor I asked them via customer support what else I would need to use it to soda blast...

That's a good suggestion. Thanks

Thanks all Can't remember ever seeing the gap before but for those asking it is under the top layer of bricks.

Hi all Sorry if I have the terminology wrong. Have a 60s bungalow with heavy concrete tile roof and was in the eaves yesterday when I noticed some movement of the layer of bricks the roof base plate goes on to. Bit concerned about it. Would strapping the plate to the joists be a solution...

Hi all What would you put on the edge here to make as neat a finish as possible. I have to do the prep for the plasterer coming Friday! Patio door has come out so want to keep the rock as it is in the conservatory to right of pic and finish the reveal. I'm hoping to board up to the existing...

//www.diynot.com/network/tzartisan/albums/ Hi all Hope the album of photos helps show the problem. Largeish 5x3.5m glass roofed conservatory sinking in one corner. It was either a guttering overflow problem now fixed that was causing it (unless coincidence it happened that corner) or...

Hi all. We have a south facing house which currently has a UPVC and double glazed conservatory with a glass roof. It is virtually unusable in summer and freezing in winter. It is a reasonably large structure at over 5mx3.5m We wondered whether there is any way of removing it and replacing it...

Thank you for replying - I should have thought of that but wanted to minimise disruption as the beading is off on the inside only so thought I could remove the glass from inside. I will give that a go. Thanks.

Hi all We have a composite door that was fitted with the wrong glass - the door was faulty too so the installer just left it here as it was (see pictures) We can live with the fault - frame out of square but now have the correct glass to go in the door. I'm unsure how to take out the old...