Recent content by vernerbongo2

Thanks guys

That would make sense because its near the front door and thinking about it 6 inches from the ceiling in the photos Thanks

My niece sent me these photos from a house shes just bought. Looks like a dimmer switch, I've never seen this before ? What exactly is it and brand? Thanks

Thanks @assuhors Not sure if there'll be much difference but worth a try, definitely more movement in the crimped brackets.

I have a Beko Oif21300b oven and the heating element warps and obstructs the fan, it needs replaced every year. Is there such a thing as an upgrade? Smaller fan blade Larger element Higher quality element. Every element it's had has had the crimp type spacers not the welded type, would this...

Thanks John I can't understand why it started giving me this bother at under a year old & had only been use a dozen times or less. Is this normal? As I said earlier my marunaka has had almost zero problems & I also had a nikkari with a kawasaki engine for 6 or 7 years, no problems...

Not sure if this topic is even covered here? I have an oleo mac 27cc Strimmer. From engine idle to acceleration/cutting the engine cuts out. Also hard to start. When I adjust the high & low carburettor adjustment screws everything works fine for a few weeks then it does the same thing again...

Neff dishwasher panel has no lights, I tested the power and it's getting to the on/off switch. I'm not 100% how to test the switch as there are 6 terminals but I do know the following. Thick brown is live Thick blue neutral both reading 240volt Grey/black striped & white cables go live when I...

Hi guys I went to replace my neff oven heating element and behind the fan cover there are rust holes along the top and bottom edge of the indentation (cover fits flush over) I filled these holes with a flexible fire cement type product yesterday. There was a gap between the metal cavity and the...

Thanks EFL I think this will do the trick, I'm replacing an in-line fan in the attic which has a PL, SL, N. The instructions weren't just as clear as yours. Much appreciated :)

There are several diagrams with several configurations. This diagram is for a set up with a timer and high speed.

Yes I get that but where exactly do I put the link wire? Am I right in saying I just put a link in between 4 and L2? Thanks for the reply

Slightly confused with this bathroom extractor fan wiring diagram, can someone please explain it in layman's terms? Much appreciated.

Apologies to anyone who couldn't pick up on what I was asking or ment. Ban-all-sheds forgot to mention it is the downstairs hallway a switch at each door. Yes I understand and my brother understands one dimmer would set the light level. Thanks for all the input and banter :)