Recent content by Xenophya

Hello again, and again many thanks for the replies. To answer your questions, all of the lights currently work and always have, I haven't yet changed any of the original wiring I have just been trying to work out what has been done before we moved in. The Spare Bedroom light currently works...

Hello again chaps, Sorry for the delay in replying I have been at work all week and its too dark to do anything when I get it. I spent all day yesterday trying to figure out what wires go where. I realised that in order for my test with the multimeter to check continuity to work I...

Hello Again Chaps, Firstly big thanks for all of the assistance it is very much appreciated because I am totally lost. Ok I have, as suggested, removed the wire F which links the Com on switches 1 and 3. This resulted in the main living room light and and the landing light not working at...

Hello again Chaps, Right as you all correctly spotted I made a balls up with my diagram. I had the middle switch upside-down and one of the wires I thought had continuity doesn't. Not sure how I managed that but I have now checked, rechecked and checked again to be sure. The following...

Hello, I'll recheck in the morning to be sure that my diagram is correct. As I say in my post in order to determine which wire was which I took a 5m long wire and a multimeter. One at a time I disconnected a wire from the switch downstairs and connected it to one end of the 5m wire...

Hello, i'm trying to sort out the switch for the landing light. Ever since we moved in if it is on downstairs you can switch it on and off upstairs, but if it is off downstairs you can't switch it on or off upstairs. To switch it on upstairs it has to already be on downstairs. (I think...

Hello, Once we have raised the level of the floor and decked it all out with ply I want to finish it with a hard wearing paint or resin. It is a workshop floor (we are a motorcycle design business) if you look here you can see our studio...