Recent content by zac1234

I tested them and they both consume the same amount of power. What I am left with assuming is that there is a problem with the way the bricks were manufactured as suggested by someone else in the thread

Yes thanks. The guy talks about it at 5:30. For me, there is small amounts of moulded plastic that I am struggling to get out. Tried for more than an hour and the seal isn't fitting into even one of the corners

I'm replacing the seals in all my windows. The new seals are a tight fit but with some washing-up liquid they do fit. The issue I have is in the corners. There are lumps of PVC that I've tried digging out but I'm not able to clear them out properly. The 3 options seem to be: 1. Leave them as...

There isn't a vent to open/close. I took it apart today and all looks good. The only thing I noticed is that some of the bricks seem to have some bits of metal coming out of it. When I took them all out, they all seemed hot. I was surprised at how hot they were as when I touched the outside of...

For me, I can click the battery icon at the bottom right of the screen, select Battery and under that select Battery Saver. There are options to turn on Battery Saver when the battery reaches a certain percentage

I tried this last night but unfortunately hasn't worked. The heater stops storing heat at 7am and I can already feel it getting cool less than 1.5hrs later

Thanks for the advice, I will try this tonight

It's in the living room behind the sofa

I had 3 storage heaters installed 3 years ago. Two if them retain the heat well, one of them doesn't. The one that doesn't will get just as hot when it's turned on but will loose the heat so much quicker. I doubt there could be a problem with the elements as the unit isn't old enough. Is it...