I was fitting an OV yesterday and surprised to see the combustion chamber was only fixed to the backplate by three studs and the fourth bracket was not fitted.
Whilst its held firmly with the three studs it allows the unit to move against the thin back and could give rise to vibration noise.
Also the black wires at the top left of the CC were projecting too far forward and at risk of getting trapped when the cover is replaced. Its easy to pull them back through the cable tie but thats best done at the factory!
Tony
Whilst its held firmly with the three studs it allows the unit to move against the thin back and could give rise to vibration noise.
Also the black wires at the top left of the CC were projecting too far forward and at risk of getting trapped when the cover is replaced. Its easy to pull them back through the cable tie but thats best done at the factory!
Tony