New Ballast
- Thread starter Fitness
- Start date
Sponsored Links
The way the old one is wired is on the box!
The way the new one is wired is also on the box!
Obviously it will be slightly different as you'll need to connect two wires from the old ballast together. You can pick which ones, but 4&5 would look suitable candidates. Have another look at both. It's not difficult.
The way the new one is wired is also on the box!
Obviously it will be slightly different as you'll need to connect two wires from the old ballast together. You can pick which ones, but 4&5 would look suitable candidates. Have another look at both. It's not difficult.
The two diagrams are correct and are the same, but your new device shows that two of the terminals on the bulb are now connected together. So:
Old = New
1 = 4
2 = 5
3 = 6
4 = >> Join the two bulbs together with their
5 = >> two wires with a connector (or at the bulbs).
6 = 7
7 = 8 < Typo corrected
8 = 9
sfk
Old = New
1 = 4
2 = 5
3 = 6
4 = >> Join the two bulbs together with their
5 = >> two wires with a connector (or at the bulbs).
6 = 7
7 = 8 < Typo corrected
8 = 9
sfk
Last edited:
Sponsored Links
old to New
1 to 4
2 to 5
3 to 6
join 4 and 5 in a connecter
6 to 7
7 to 8
8 to 9
Earh is 1
L and N is 2 and 3
1 to 4
2 to 5
3 to 6
join 4 and 5 in a connecter
6 to 7
7 to 8
8 to 9
Earh is 1
L and N is 2 and 3
Last edited:
Rocky, doh, yep I made a typo there. Now corrected. Thanks
Sfk
Sfk
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Similar threads
- Deleted member 18243
- Electrics UK
