Laptob rubber grip

dan2002 · 28 Aug 2025

Hi, anyone know what glue to use to stick this rubber piece back onto my laptop base? I tried to use fabric glue but it came off straight away!

Would appreciate any recommendations! Have attached a picture to make things clear

omega015 · 28 Aug 2025

double sided tape is what I use when I've had to open up laptops. You can get the correct width of this on the likes of amazon.

dan2002 · 28 Aug 2025

omega015 said:
double sided tape is what I use when I've had to open up laptops. You can get the correct width of this on the likes of amazon.

Makes sense, they themselves added that and I peeled it off due to adhesive getting weak.

Would appreciate the text you would write on the search bar on amazon, thanks

dan2002 · 28 Aug 2025

*found some, would 1mm or 2mm be better? Bit in the middle of what size to get

omega015 · 28 Aug 2025

Is that width or thickness? I would pressume the width would be more around 5mm that you need to fill the void and stick the rubber back down with. If its thickness then the thicker tape might give a slightly better bond as probably more contact area being made.

omega015 · 28 Aug 2025

This is what i used on my last laptop repair and the user hasn't said its come back off yet, I used the smallest one so 5mm. https://www.amazon.co.uk/dp/B07WYLZ...fed_asin_title_4#averageCustomerReviewsAnchor

dan2002 · 28 Aug 2025

omega015 said:
Is that width or thickness? I would pressume the width would be more around 5mm that you need to fill the void and stick the rubber back down with. If its thickness then the thicker tape might give a slightly better bond as probably more contact area being made.

I thought it was width, looks like its thickness, ill take your advice!

Laptob rubber grip

dan2002

Attachments

omega015

dan2002

dan2002

omega015

omega015

dan2002

Similar threads