Search results

The one switch is not fully on. I can clearly see that in picture. You need to turn fully off then lift to the on position to switch power back on. Reset it... Id turn every breaker I could find to off position. Including main breaker. Turn all the switches on leaving the main breaker to last...

I've bought new springs for handles online.

Yeah. You can buy cut to correct size if you measure. I'd remove and take to local uPVC manufacturer or supplier. Match colour. Some can cut panel there and then while others have to order in. Some have a security metal plate in to stop the blow torch burglar melting. Up to you if you want...

Reason I asked was mice turn loft insulation that colour and it smells musty. I don't know why that's gone like that tbh. I don't think its mould

If it's a straight swap go for it.

Tumble dryer outlet or air conditioning. You can buy a new white panel or glass window for that but you will need to find the correct white uPVC colour.

Don't burn yourself. Be careful and sensible. Grab the radiators with your hand tightly. Count to two. If you can hold tightly for more than two seconds without it becoming uncomfortable, you're radiators aren't hot enough. Turn the water temperature up.

Just use the emulsion to prime

That is not correct

Any smell to it?

Add a splash of water to emulsion and use a mini roller to prime. Leave overnight to dry. Paint the wall. Durable emulsions tend to flash more than standard vinyl matt but I wouldn't worry about it especially if so small. The filler you use is less likely to flash anyway. It's unlikely to...

Treat with patio magic Give it a few weeks to work. kiln dried sand in the summer when it's dry and clean

Lath and plaster ceiling or plasterboard?

You need metal bars inserted in joints to stitch bricks before lime plaster. I assume you will have lime plaster as old

Powered air-purifying respirators but not cheap. No restriction with air. You also need to dustless sand to keep the air clean. Bodge a cheap DIY orbital sander on a cheap hepa vacuum will keep dust low to nothing

3 days work. £180. - £220 a day plus materials. That's a guide. Might only be 2 days work if it's in good condition and just needs one on ceiling. Two on walls and one on the woodwork.

What written on deeds? Look there first

Masq purple tape and cover the entire panel. As plaster is setting dig at the centre and find masking tape. Pull off. You can use any masking tape I guess. I just like the low tack

I'll guess it's bitumin felt you have from 50s 60s and 70s. I have just taken first batten off rolled gritted felt along with felt supports under.

You can use shed felt