Search results

Hi, Strange question but to cut a long story short I got my planning appeal rejected for a front extension. I know pd allows you to build a porch 3x1 but is there anything in the rules that stops you building two seperate porches 3x1? Thanks

Hi, I’ve got my little girls bedroom to re skim, I’ve already over boarded it and usually use a orange mesh tape which I’ve found great as it sticks well however our local Place only had white mesh joint tape in but it just won’t stick would there be any issues to use a bit of diluted pva to...

Evening, I’m hoping someone with a lot more experience in tiling can help me on this one ! I tiled our kitchen with 98x98mm flat gloss black tiles however due to renovation I need to extend the tiles however I just can’t seem to find these tiles anywhere, the closest locally to me is 98mm x...

Afternoon, I’ve had to cut some Slabs to use as coping stones 50mm thick concrete slabs, I just wondered what would be the best grinder disc To finish thecut Sides or other suggestions? Thanks Jake

Woody what I mean re plans is that the council expects a certain scale of plans etc before they will put them on the planning portal, the people who draw plans for a living wanted quite a lot which I’m happy I don’t have to pay lol

Lol thanks noseal, gives me some things to think about… I’m looking forward to this, I drew all my plans by hand and was a challenge because I had no idea however the next plans will be so much easier as I’ve leaned a lot, I’m chuffed they were good enough to be accepted and all it cost me was...

Hi I’ve just got my plans accepted for a small bay window and also got A building notice accepted for a small pd extension to the rear. The plans need to be still circulated in the community for people oppositions however I wondered if someone could tell me what things I’ll need to consider/...

Thanks guys for your help

Cheers thanks Taylor

Bel Ch602T re hob. Ideally using the same circuit for ease if it’s got to be hard wired, not sure why I thought it was a 13A I’ve not really looked at it as I’ve been installing some of the cabinets but I’m upto the oven housing now so sorting the wiring before the carcass is the right time...

Hi Taylor , Sorry I meant 32A, it’s just how the light caught the label yes it’s neutral , earth , l1&2 It’s a built in oven and hob both belling, The oven is a bl160fp, not actually unpacked that yet but I think it’s just a 13A switched fused spure but need to check. Not sure atm what model...

Hi, Would it be ok to use a 30A breaker on this? The cable looks to be 6mm? I was going to connect it to the current cabling which is 10mm to 30A breaker or should I reduce it to a 25A? I’m fairly confident that L1&L2 go together on a single phase but I don’t have so much pride that I don’t ask...

Hi I’ve got two sections of my House to render ( top section) Im Intending on using one coat render with two coats scratch and skim /top coat… however due to Time commitments I’m gonna have to do it on different days, I wondered if I get my scratch coat down how long could this be left please...

I’m no renderer but I would think no, you’d be better rather rendering it correctly to get the depth so it is even and doesn’t crack or get some cement board , fill the joints and paint that

The rust damage are on the two drawers I’ve removed, the carcass holds 4 drawers I’ve put the corroded ones in the bin so there’s two currently in the carcass Thanks Jake

Hi deluks It’s the sides Thanks

here’s the sizes :) Thanks Jake

Hi John , I’ve got The screw for the runner and no no other defects. Yes the drawers are metal, as mentioned Something damp Got left in the and got Damp and corroded. I’ve checked for some number sn number etc and there’s nothing, the carcass is 18mm Thanks Jake

Hi John D , That makes for your reply And Apologies For the lack Of Detail, two of my drawers are beyond repair it looks like they have had something damp in them If it was just a mitre joint of bottom Board I’d fix them But it’s beyond that lol . Here’s a couple of pics … I’ve actually...

Hi, Not sure if this is the right group But there isnt a kitchen fitting one Lol . I’ve got a 500mm kitchen drawer unit that holds 4 drawers… does anyone one know if drawers are a standard size please as two of them are on their last legs! Thanks Jake