Search results

What size cable 2.5mm or 1.5mm. Don't think radiator will be above 1KW

Looking to get an electric radiator to fit in the downstairs toilet room(not bought yet) Is it possible for it to be hardwired using the single socket, if so what's the correct/best way. The single socket is on a ring main & i assume i could change the single to a double & put cable from...

How more expensive? Is there a formula (simple lol) i can use to work it? Cheers

Afternoon guys. Piping a radiator to the downstairs toilet is going to be a pain, so looking for alternatives. Started looking at oil filled electric radiators only because a mate of mine has a Farho Elegance in his snug & say's it's great. No idea how much they would cost to run thou...

Cheers opps for the reply, already used filler before seeing this post. Happy with the result thou.

Cheers daggermark especially the last sentence

Morning guys, i have taken some paint off when removing frogtape. Which is the best way of repairing the damage, use fine filler or build up layers of paint? Many thanks

Probably be cheaper to buy off eBay

Might see if i can utilise it.

Looking for a replacement hinge for my large storage box. The only one's i have seen are on eBay & with posting cost approx £40 Keter were no good ☹️ Anyone know of a company doing it for a more reasonable price? Cheers

It wasn't foul water but i have decided to lift it all out & let it dry. Glad i did, it's not a big area but 80% of floor was wet. Cheers for replying oldbutnotdead

Morning guys. Water has got under vinyl which is on top of a concrete floor There was a big leak on toilet. Will i need to remove everything & lift vinyl & let it dry out or do you reckon it will evaporate . I suppose im concerned about it smelling or mildew. Cheers

Cheers opps for your reply. If I buy some BIN & rub down the area where paint was originally peeling would i be able to paint over the whole door frame as it is now & then give it a couple of more coats. Would that potentially sort the problem out?

An update to my original post. I think i have made a balls up with this. I'm not sure you can see properly in my photo, but a brown stain(no knots there) is coming through I noticed paint was peeling in that area over winter so just scraped it off & sanded everywhere before i repainted...

Is it hard to get hold of nowadays?

Morning guys, i've been using the above for internal woodwork. I rubbed door frame down to bare wood & used knotting solution, 2 coats of primer & 2 coats of Dulux satinwood water based gloss. Some of the knots you can just about see still ☹️ Is it just a matter of putting more coats on , or...

I done 2 coats of Zinser cover stain & 2 coats of Dulux water based quick dry satinwood (mid sheen)

Finished painting door & am quite happy with the result. Thanks once again

door frame. I would like to not have to put a plastic trim back on window cill. It's quite a large gap & hoping someone could be able to suggest the best way to fill & make sure it's level before painting. On the door frame i want to fill the whole/gap. I can cut up a bit of wood & glue it in...

Cheers JobAndKnock, excuse my ignorance but what's a riving knife? Mine is corded btw