Search results

I want to remove some wireless PIR's while decorating a room. How do I disable the tamper so the alarm doesn't trigger? I have an engineer code.

I took the lid off the smartcom box and the tamper went off. Took a photo of the smartcom password then closed and Secured the lid. It took two or three attempts to switch off the tamper but eventually manged it. I connected to the smartcom wifi broadcast and reentered the router password on the...

Thanks. Does the smartcom box have a tamper?

I have a texecom smartcom connect fitted to my texecom elite home alarm. However i had to reset the broadband router due to a fault. Now the smartcom connect box is flashing and is not connecting to wifi. I’ve pressed the wifi button on the smartcom connect box and i see the smartcom ssid being...

I own a 60 year old house and it has a black rubber water inlet hose coming from the watermain through the toilet floor joining pipe work. Over the years the pipe has been painted over with wight paint. I’m assuming the pipe is as old as the house. What’s the life span of these rubber pipes...

Heres the toilet

The actual cistern.

I have a Geberit cistern (originally repaired) but now needs replacing. Its discontinued. Are there any alternative straight swaps. Item number 223.830.21.1 dual flush. For reference its for a slim line Rak toilet. I’ve included some photos for reference.

Its a texecom premier elite. It has a smartcom panel for remote access. I’ve been given the engineer code.

I've inherited a Professionally fitted House Alarm, however, I don't want to pay for expensive maintenance agreements. If I find that I'm unable to maintain the system myself can anyone recommend a system that is easy to install and maintain? I've seen DIY home security systems on the market...

Hi, I've recently moved into a house and I have a Texecom Elite Premier installed plus a Texecom Connect box. After some reading, the system can be operated by an app externally. The system seems to be a hybrid system with wired and wireless sensors. My question is, how easy is this system to...

Thanks for those who replied. I dismantled the tap but unfortunately was unable to get to the seized part of the tap. Can anyone recommend a good quality single lever tap, similar to the one in my photo. regards Mark

Hi, I purchased and installed an Ikea mixer tap a couple of years ago and the warranty has now expired. This tap started to get very tight to turn and the white washer was protruding from the third pivot from top as shown in the picture. Can the tap be taken apart and the washer replaced?