Search results

So had a quick look at ha frigate https://community.home-assistant.io/t/setting-up-frigate-in-2025/894542 Shows the streams command lines, obviously you need the specifics for your cameras/ DVR

Not family with HAs frigate but would expect that some on here do use frigate and maybe able to give more specific information on it. I keep saying I will look into frigate but never seem to get round to it, my understanding is frigate can be used for some advanced analytics of the video data...

The cameras on your DVR could possibly use command lines. So you DVR is on up address 192.168.x.x Each camera is on a channel 1,2 and 3 You then have users name and password for the DVR. So the command line will be something like IP of DVR + Channel of cameras plus username of DVR plus...

Yes it’s possible to get a splitter. What are the Poe requirements of the cameras, what is the resolution?

I am going to suggest the unit is over 10years old and should be replaced anyway. Risco UK are discontinuing Agility range, the wireless uses the same technology but it would be worth checking new units are compatible. Make sure it’s in correctly and power cycle the panel if the tamper is...

You can use the master user code to check the event log. To change things you will need the engineers code.

Do you have access to the cloud account the panel is on? There are only a handful of places where these things can be changed. I would first check the event log to see what the panel thinks happened. This may give an insight into which settting needs to be changed.

Do you have engineers code?

Does the keypad have 8 core already run to it? You only need 2 cores? Well we actually need one, but simpler if we use 2. The pirs are wired in what way? Both Back to the panel, or from PIR to PIR then back to the panel.

chased and awaiting an answer on your specific issue. Updates are being rolled out from today and Texecom are sending emils out about the update and what is covered in it.

tests back here, seem to to show without the cloud account it’s impossible to change the email address for a user. I have emailed Texecom for advice on this mater as it’s clear you won’t be the only one in this position. other than that, I suggest you set up your own cloud account and attempt...

Let’s see what we can get sorted for you

Pm me

Well we charge more than that a visit to be fair. Pm me

new account? Why? Unfortunately the way the system works now is as follows. Your panel is assigned to a cloud account. This is done via the installer. If you self installed you would have this information. If however it was installed by another installer you can’t create another account. You...

Log into your account ??? You have this on the cloud????

Depends on the house, but you can run cables without channels in walls in many cases, but you have to take up carpets maybe and the odd floor board. All depends on where everything is going. In terms of cost, wireless devices are more expensive than hardwired and need batteries replacing...

Always go hard wired first, use 8 core copper cable. Dont run near mains cable. Your budget and what you want form your alarm should be considered and then match d up to what’s available.

Whats you budget? want to get realistic, I have recently purchased one for a family member, budget versus functionality. The manual that came with it was pants, but its being trialled. are we talking £50 or £2,000?

The NVR is on your network, if you have concerns about the Chinese government nosying around you should have it on an isolated network, preferably its own network on its own internet connection. Then where it can look is restricted from the off.