Search results

Thanks for the suggestion Adam. Do you think an epoxy grout between the tray and tiles might offer that flexibility, or should I remove the grout and replace it with silicone? The tile-tray gap is fairly narrow (around 2mm) so it might be tricky.

I think it seeps underneath the horizontal metallic channel which the glass drops into. The glass is a Simpsons TEN by the way and the builder tells me there's gasket tape running along the inside floor of the channel. Given this is a new installation, I'm concerned that it might get worse over...

Dear All, I've had a shower tray and glass panel installed. The panel is siliconed to the shower tray and the floor tiles are grouted up to the tray. On first use, I've noticed a minor leak beneath the panel. I'm also concerned about whether the grouting is up to the job as the edge of the...

Dear All, I have a glass block window on the exterior of my building and have noticed that with all the recent wet weather, there is moisture leaking through just above the glass blocks. I took this short video of the problem with my phone: www.66georgerow.co.uk/repointing.m4v (8Mb)...

Sorry to dig up such an old post, but thank you to all who replied. I eventually managed to source the supplier - Feet International (Bermondsey, London). Just as you suggested - they supply Chinese imported bathroom products.

Yes, it's not the best workmanship and the only way I can think of getting access is to cut between the tiles and the skirting with a sharp Stanley knife. What a nightmare! Out of interest, how easy do you think it would be to get a marine ply panel and attach the tiles to that? How easy is...

All, Would anyone mind taking a quick look at these tap internals please? I have a new build flat and the bath filler tap has started leaking upwards. The builder can't/won't share where this was supplied from and I'm not aware of any generic internals that might fit. Many thanks in...