Search results

  1. M

    Riello burner 240v at cont box nothing happening

    Thanks but as i said it is,now totally dead. no voltage going out at motor connections. no further tests possible as it doesn't run!. solenoid impedance is good. im guessing that ,as i have 240v input to control box. it must be control box . but this isnt my field. im a leisure vehicle...
  2. M

    Riello burner 240v at cont box nothing happening

    Hi All . My riello 2.2 burner has been misbehaving recently. sometimes just blowing air .after heating water as normal. Now completely dead .I have 240v at control box .No outputs from motor wires (why3 wires?) Impedance good on solenoid . Pump was putting out 9bar yesterday ...
  3. M

    Oil boiler riello burner firing fine until i put it back in boiler ?

    Hi Guys . gave it a while to settle down is this looking good
  4. M

    Oil boiler riello burner firing fine until i put it back in boiler ?

    well i think ill stick to motorhomes and caravans :) I fitted another new nozzle exactly the same . Then i decided to really go to town on a decoke .I obviously hadnt been thorough enough . Still mystfied how the exhaust gases mange to get past all of those baffles and thru the...
  5. M

    Oil boiler riello burner firing fine until i put it back in boiler ?

    Hi its a firebird enviromax 26kw condensing combi
  6. M

    Oil boiler riello burner firing fine until i put it back in boiler ?

    Only one flue seal .the one on top of boiler . Its rubber and new
  7. M

    Oil boiler riello burner firing fine until i put it back in boiler ?

    Hi sorry not with you . It has a balanced flue . So why is the fact its internal relevant? It is internal by the way. Cheers
  8. M

    Oil boiler riello burner firing fine until i put it back in boiler ?

    Hi Yes removed flue and cleaned it removed all baffles and brushed and vacuumed . Checked all filters including mesh one at tank. Is it possible boiler could be clogged somewhere that i cant access ? Restricting exit of exhaust gases ? Im a leisure vehicle tech so do...
  9. M

    Oil boiler riello burner firing fine until i put it back in boiler ?

    Hi Thanks for reply oil pressure is 9 bar as stated on plate . checked and adjusted it slightly .Plate also says air set at .7 . which it was already at . I put my analyzer in flue and its just choking it !
  10. M

    Oil boiler riello burner firing fine until i put it back in boiler ?

    Hi Guys my oil boiler is playing up . lots of smoke .I removed burner fitted a new nozzle same as original .It fires up fine on the bench When i put it back in boiler it cuts in and out . If i remove burner securing bolt and pull it back a little it fires up and works...
  11. M

    party wall advice building an extension please

    Hi im about to build a small extension at the rear of a terraced property .The neighbours either side have already built 3 metre deep single storey . extensions Im intending to build my single storey extension between theirs .My question is can i use the party walls as my walls .they are on the...
  12. M

    party wall advice please

    Hi im about to build a small extension at the rear of a terraced property .The neighbours either side have already built 3 metre deep single storey . extensions Im intending to build my single storey extension between theirs .My question is can i use the party walls as my...
Back
Top