Search results

Thanks guys. just the job. Will these fit into a back box for plasterboard wall

Looking for a double isolation switch that has washing machine and dryer marked on it . Cant find any . Anyone any ideas Where I can get one . Thanks Alec

Thanks. Think I will hire a jig and router from hss hire (35) a day. I don't like the look of the strip that buts together. Ive watched some youtube videos on how to do it (they make it look easy) . I read you go 50 mm over and then do a Mason mitre and a fem one on other length and should slot...

Im doing a kitchen refit. I got square edged 40mm worktops from a big shed. Two will meet in a corner. What's best way to join. Butting them together or a mitre joint. . Does biscuits and bolts still need to be used if butting. I know you can get metal bits that slides between the two . Does...

Ahh maby the float isnt down right and its saying the bottom is full . As u said earlier

Noticed empty water light is on now. Its collecting water . But not full . What causes this

I turned the pipe around so kinked bit was on the bottom. And put it together.And water has went into the top chamber. First time in years. Thank you for all your help. I will invest in a new piece of pipe and if that don't work then a new lift pump

The pipe is kinked a bit . I put a bit plastic straw thro it and it hangs on to the top bit. Other side falls out. . How does the water get in tray at the back . I know it condenses but dont see any way in or is that what the clear tubes for (or overflow)

Got the pump out. Cant see any red ring ive took pic of bottom

I can't see how to get the pump out t check. It doesn't just lift up. I put more water in. And when I streach the black pipe right up the water comes out but when I bend it over it stops . And sometimes you can see the water coming to the top and going back down then up . Cant hear any humming...

I took the bottom black pipe off and the water splurts high when machine switched on. Doea this for a second then its a small amount of water for each time after that . Just enough to go over the top. Black Pipe is clear. But water not coming out other end

Didnt have to push start the drum. Went ok

Ok took back flap down and poured cup water in the small hole next to the black pump . Took tube of top and nothing coming out it

I gave it a good old push and it started. Ive tryed starting it from panel about 8 times and it goes every time. I take it if it does it again then get new cap. Other prob. (Dunno if it was because ofthe bbroken impeller. ). The water tray wasnt filling. I've cleaned out the filter at bottom ...

The drum wont move by hand when its on. Makes humming. I've took small video

Thanks rocks1. I've did that put motor in and got the belt on. But its doing as it done the first time. The drum is free to move (does not turn freely but with a good hand push it turns a bit). The drum doesn't turn and there's a humming from it but nothing. The element heats up ok. Any ideas?

My cousins radiators are 8 mm microbore .He got his changed to 15mm and he also changed some of his radiators from single to doubles. And now his house is boiling. But make sure if changing radiators that your boiler can handle the upgraded btu rating. or your house won't achieve the heat you...

Hi in this machine it was making a racket for a while and not taking the water to the chamber tank. Then it made 3 loud banging noises and stopped. I took lid off . Belt was fine . Took side off and noticed water at bottom of impeller and the shaft it is on going to the motor was snapped into...

Thanks for replying. Im lifting the tray for another reason but the waste is stuck. To get to the under side of it I need lift bedroom floor. Im in middle of a refurb. And thought if I attacked if from the top it would save time . Would twisting from below not just move along with the top

Hi . Im having to take my shower tray up. I have siliconed the threads when I put the trap together. I used dow for this the clear stuff, now im trying to get it apart. The top is tight when trying to remove with tool that came with the trap I tried heating with hairdryer and hot water...