Search results

Thanks for replying. I sorted it by using glue and sawdust filled into gap then smoothed. I then stripped the white vinyl wrap from a off cut. Cut the old wrap off the damaged area and replaced it Matched in nice.

Guys. I was cutting a decorative tall fridge housing gloss white claddon panel. Had it clamped with pump clamps and used my circular saw and the clamp failed. It cut a 6 inch line accross panel. Its at top of panel against wall. What can I use to fill the cut and match it to gloss white...

Yeah going to tile it. I will try again. See what they offer. If anyone's interested job is in Glasgow

Tryed to get a guy to mire it from myhammer but costs were over £ 150. Heres some pics of worktop. Theres small 3mm gap cause units out .

Thanks owendiy. That bar is for joining two pieces of straight together. One I want is a corner but each face is square. It has no radius. Will post pic tonight

Not in house but will load one up tmz

Thanks doggit. They havent been routed for bolts (long story). So I bought worktop joining plates (square plates with screw holes in them) One bit still has the laminate on it. The other cut. If I pva or clear silicon it. Do I then use colourfill on it to hide the line ?

Ohh drat . Hopefully someone will sell one

Thanks foxhole. That looks ok. The t shape. Will fit both sides. Good price to. B&screw charge £8 for same make ones .

Hi guys. Got two bits of worktop that have a square edge profile. The corner join bar I got has a 6mm round radius on one side. But doesnt go over the square edge or worktop. Ive been trying to find one that I can use to join two square pieces together. I got one from sf but didnt work...

Its just the sleeve to hokd the 1/2 bit

Anyone

Hi guys. Got this routerJCBd-pr12f and it only came with a 6 collet ( it was from ebay) So need a half inch collet for this device, any one know whats suitable and where to get it . Also need instructions for this device as it comes with few bits and dont know what they are. Using it for...

The one I've got just now is a bog standard one. But folk swear by frost free or low frost

Looking for a integrated 50/50 fridge freezer that's frost free and a big freezer that can hold a pizza box.and around 90 l.and led Don't want to spend a fortune

They were signal wirea. Did what you said and removed wiring . Working perfect. Just messing with it on phone. Thanks for all your help

Yeah gray sheath is stat. With just the 3 wires to stat ( inclusive of earth). So take red wire out reciever. Connect the neutra ( black that's in chocy box ) l from the white sheath to the vacant red connection

Thanks for your help petit-pablo. I will do that. Hide it with the wifi thermostat. Cause I would have cut it back to reciever, took away the earth from the old thermostat and joined the red and black signal wires to the earth teether. Making it tidy. As the hive reciever won't fit flush...

Thanks bud . My wiring centre has no legend, just a tangle of wires . Joining the two wires into a connector block at thermostat seems easier . Or cut wires back to the reciever and join them their.

To link out the thermostat. I remove the red wire (far right) , the earth and remove neutral from the connection block. What do I do witbh the other neutral in the block, just leave it in block? Does the terminal I removed red from just stay empty. What terminals do I use to bridge out...