Search results

Hi. The hob is gas. It will be the sparker that's plugged in. The two sockers for lights are for the two transformers that are 0.5 amps and the one for pelmet at 1 amp. So was thinking if after a fcu can add sockets ( if it comes of grid) . The switches I was getting is 3 separate one. For 3...

Im just running cables iin wall as its bare studs then plasterboarding. He will be connecting up then testing.he cant spend time on it and to save money in doing cabling. I will leave loads incase he wants to take it to cu

Getting grid switches installed. Spark from work is coming to test and put together but im doing donky work. Its going to operate cooker hood, hob and maby plinth and pelmet led lights. And the other side of room for washing machine and dryer. The plinth and pelmet lights will either be...

Breathing

It has 6 fuses in it. 2 red 2 blue and 2 white. Hes a spark that I know . Just getting him fitted in. . So he changes it over then the shower one can be incorporated into it aswell

What should I expect to pay for my spark to install/ test it the oven connections ect . Hes charging 250 for cu change over and testing. No I don't have test equipment. Just a multi meter. As I know electricity kills and not to be messed with

That's what it says see pic. See second pic .

Yes its a digital shower that runs of the.6 mcb. Going to get cu changed in a month when the spark doing it is free and check cabling . So new 32 mcb and 63a rcd it is. For the 7.5 load. Is the 6 mm cable ok . Might get him to renew it since its not been used . I take it since its two devices...

My cu setup is a fixed fuse wire box. When the old Tennant had shower installed they put another cu in for breakers. In this cu it has a 32 rcd and a 6 mcb for shower. The old cooker cable is not connected to anything as it was taken out in favour of gas. In the instructions it says it is...

I read the instructions. They say its supplied with a flex but this must be changed. And fused at 16a. And a l or b circuit breaker. Would the 16 a do both from the dual plate or they better separate and two independent breakers

Sorry for confusion. I ment the cable is 6mm . I did mean the rcd is 32. Its on a cu that can take breakers it is an additional to the fused one till its changed. In that unit it has a 32rcd and a 6 for shower. Cooker one wasnt installed but wiring is there ( had gas). Both devices are bosh.

Hi guys . Replacing a double built in oven with a combi oven microwave total rate 3.6kw. And a pyrolytic single oven rated 3.65. I know the single outlet would need changed for a dual cooker outlet . The old cable is rated at 6mm. Its connected to a cu containing a 32 rdc . Would a 16a breaker...

Its a standard height unit. The drawer pack would be using 2 deep drawer fronts. (Size I will have to check). Top door would be around 600mm bridge door. The oven and microwave I haven't bought yet. On the b&q book it doesn't show this option but did see it in one of the stores

I bought a cook and lewis tall oven housing. I want to fit a single oven and microwave. But also 2 drawers at bottom. I was told this would be possible but now told it ain't. Can this be done with modifications

Umm , err ok boss lol

Lol didnt come up on mine. Obviously some spelling mistakes and words that are not in the database lol. Didnt check before posted as doing it on small screen and at work without getting caught lol

Red underlines ?, just want to run 3 led under cabinet lights and printh lights from a lightswitch. But know if has to be fused down using fsu before going to lightswitch. The cabinet lights I've not bought yet just the 12v led plinth lights. Old set up was 3 tube lights going to fsu

The circuit at moment is 240 from fsu. For undee cabinet lights ( gonna change then to led) and the led plinth lights. Its just junction box and a 12v tranny. Ive tested it plugged into mains. I will try find ampage of them and if I get cabinet lights that are about 3a then maby can run both (...

Got a 12v transformer plinth light jobby from bigshed. Its a molded plug. And ive under cabinet lights that run of a fsu ( not very pretty plonked on tile run). I would like it so I could switch theses on together from a 2 nd gang on light switch. is this doable of is fsu only way ( not pretty )