Search results

Easy to do for someone like me wanting to forget DIY and enjoy the BH. Put sill in with foam, but even though i thought I'd held it long enough clearly it hadn't set as it's not completely level and slants forward a bit. Do I cut this out ( if yes how) and start again or as its under a blind...

I would recommend a multi tool rather than jigsaw myself. Amazing how quickly the PVC will burn underneath. I also wouldn't recommend Click LVT in wet rooms, mines slippery and it just won't take loads of water I'd say with the click mechanism. For radiators you drill a hole and cut out the...

I've just done my kitchen, hallway and downstairs WC in camaro loc LVT. Never again, i'll get a pro in. Issues i've found (Being naive to think this was an easy job) Planning out sizing is important, i've probably suffered pain not planning run of tiles under doorways etc, this took a lot...

Hi, What would be the best Osmo oil for Oak Veneer doors? I've used Osmo in the past on the other doors i've got but chucked the tin and can't remember if it was Polyx i'd bought. I've got a matt finish from previous work done similar to the untreated door at the moment. Thanks

No pro but a realist and you'll be asking for trouble to patch that up I'd say....

Best thing to do here is not panic and get stressed about it, its decorating nothing more! I have done a couple of mist coasts on new plaster, then watered down the normal paints then go into full paint.

Skim job the most suited (had it done). Needs to be scrapped down a bit (didn't have it done and my arms said I should have :))

Is that new plaster? Looks like you haven't mist coated enough as yellow frog tape (if that's what it is) shouldn't take paint off that much at worse. However you have to cut in to ceilings from the wall with a steady brush, you can't do this with masking tape as you'll be asking for trouble.

Hi, Just installed one of these and it is not getting below 10 degrees so something must be wrong here. It's brand new, in a standard cabinet depth with 50mm behind the FF. Anybody had similar issues?

Seems ok for about 3sqm of wall I've got, however I'll be binning it now.

Opened up about a two year old tin of Dulux diamond Matt I had mixed up and it had these weird clumps of blue stuff within it. I mixed it up out the tin and it was fine so just curious here what it might had been?

Just did 15SQM of this sht.....awful...Big Mutt tool got blunt so resorted to chiselling out.

Hi, Got this in hall kitchen and downstairs toilet. Do I seal edges under cabs, washing machine section, dishwasher etc? If yes what is recommended? I see quickstep do a silicon? https://www.wood2u.co.uk/quick-step-hydrokit-310ml.html

Hi, Has anyone got a recommend threshold option for my tiles to carpet. that is about 4cm wide, carpet is about 3-5mm higher than click vinyl tiles and adhesive base not screws.

I'd do yourself a favor and just get a mix of Trade Diamond Matt in chosen colour at Brewers or a Dulux Centre. Its more expensive but will water down better and need less coats.

Got it sorted in the end I shaved off click bit and glued.... Really not sure this Camaro Loc is going to last, its very brittle on the locking mechanism.

Ummm, sat on arse at the moment after 15 hours of DIY work.... Do I stick another bit on the end of this one and hammer it in...take off then throw that away?

Hiya, Been working on this fit all day now onto tricky bits. I'm trying to get LVT under the door frame, doesn't seem to be any particular motion of force to move it, any tries have been random. How the hell do I get this to budge..?

What tape have people used to join underlay? It will be quickstep livyn. THanks

I use dulux trade diamond matt on mine high traffic areas...great stuff.