Search results

Use a screwdriver blade short out the two pins restore the power to the alarm codes will be 1234 and 7890 all other programming will be the same ….alternatively if there are some pirs on the system one may have a jumper link inside you could borrow ,

Only one keypad ? Did it just come up With the error on its own ? No other work …programming done on the system ?

So you have set the door bell at ending at 113 ? from web browser enter ip address ending 113 it should bring up a web page for the door bell

As an example

Ok is the ip range one of these for your existing cameras 192.168.0.0 192 .168.1.0 These are the most common ranges for most home routers , the cameras if plugged into a POE dvr with be completely different , you need to address your door camera to one of your router ranges eg 192.168.0.250 ...

What IP address are you putting into the door bell ? As the plug and play cameras may have an address that’s not your routers address range

You can fit a smartcom …it was available from v4.

Lol

Get them to send you a picture of the faulty pir , then post it on here

Swop it like for like …. Looks like they are still around ( Italian )

What’s the input set for ….eg area ABCD ….Zone type ….attributes….

So did you delete the old one , then relearn it in its place ? Or did you add it ? If so it’s going to be further up the zones ..

Changed the door sensor. . ? New one ?

If it’s the same as previous scantronic/ Eaton panels then it should have …normal/ low tone or silent setting modes ….i would get your installer back

And why’s that ..it’s the sensible way of doing it without damaging your control panel …

I would do steps 1 - 4 Open panel remove 12 + to bell Put a link between 0v and tamper return Exit engineering ….

I take it you was happy with the VTAC ones

12 core version

I would use a relay from the enforcer …then you can switch what ever you want to the Shelly …without adding a relay expander your stuck with the one output …

Is the concept with the 12 core to the keypad ? The later ones only needed a 6 core …