Search results

I need to replace an old oven with a new one, but all attempts to find one that will fit the cupboard space have so far failed. Apart from the cupboard being fairly shallow, there's a gas pipe in the way and so I may arrange for it to be moved, but how can it be moved without ripping out the...

I'm looking to replace an old Diplomat ADP3120 built in oven. The door seal and probably the thermostat have failed and this oven was "inherited" when our house was purchased 7 years ago, so its time for a modern replacement. Easier said than done! Thanks to a poorly position gas pipe for the...

I've checked everywhere and there isn't an FCU for the extractor. The junction box is fed by a 2.5 cable, which I can only isolate at the consumer unit. The earth cable was cut back and not wired to anything and only live and neutral were connected to the extractor. I've now installed a...

Thanks for the feedback guys. Using an FCU or a socket/plug has to be better than the previous installation. TBH, I'm not sure why they don't include a plug with the extractor hood.

Our oven extractor has failed, it would appear the motor has burnt out! I have purchased an exact identical model to replace it (Prima 60cm PRCH020), however I note the installation instructions state ".... a suitably dimensioned omnipolar switch with 3mm minimum opening between contacts must...

Yes they can, but not by me! I'm happy to avoid the expense of paying to have the gas pipe moved by purchasing an oven that will fit, even if that limits my choice.

Thanks for the confirmation, I suspected as much. Unfortunately, the badly positioned gas pipe for the hob rules out some of the standard fitting ovens I've looked at, due to their depth. The installed Diplomat oven has a sloping back which accommodates the pipe and I think the Kenwood I'm...

It states this in the specification details on the Currys web page, so I would assume so, although I haven't checked.

I'm struggling to find a replacement built in oven with dimensions and load rating similar to the existing oven. I've managed to find one that will hopefully fit, but the load is higher, so I need to ensure the existing supply is adequate. The existing oven is a Diplomat ADP3120 with a maximum...

The outside waste fed by the toilet and basin has screwable access on the bend (see photo). If I unscrewed this and flushed the toilet, do you think this would identify an issue? Not sure if the force of the flush would simply cause water to eject from the inspection hole and therefore wouldn't...

Earlier this year I refurbished our downstairs toilet and installed a new vanity basin, using the McAlpine Space Saver with self-closing waste valve as the trap as space was limited. 3 months after installing, I noticed that flushing the toilet resulted in lots of gurgling from the sink waste...