Search results

if its just a fauly sender then why would it be overheating ? i see no signs of this what should i look out for to see if this is infact overheating ?

yes top and bottom hoses are hot this is what leads me to a faulty guage senderin the hose behind the inlet manifold

also i have a mini diognostic and the car is not showing any fault codes

i dont think there are other issues as the heater is fine, likewise the fan is kicking in ok the onle issue is that the guage is so close to the red, then on another journey it went back to normal are these a common fault ? i dont think the car is overheating as there are no signs of...

thanks for your reply the guage sensor is in a pipe behind the inlet i believe, i have checked and there is one there with 2 wires there is no bubbling in the expansion tank and the fan cut in so im assuming its not overheating ?

i have a 1997 fiesta encore - 1.3 endura e engine today the temp guage went right up into the red, even though the car was not fully warmed up, i left it tunning and the fan does cut in, i used the car again and the guage is now showing slightly hotter than usual any ideas why this would have...

im about to lay my new laminate and want to do the best job i possibly can, I have no issues with expansions gaps around the edges, Im confused as to what i do around te door fframes, in the past i have left a gap and filled with silicon to allow movement, I also understand that the...

thats what i thought so why do all stores recomment, seems to be a sales tactic

has anyone used this new underlay which has a moisture barrier bulit in

thanks what about the cork edging ?

im about to lay new laminate and have read that i should NOT leave the cork edging in the expansion gaps, is this correct ? also i have read that as laminate is not real wood i ay not have to leave expansion gaps at all ?

what when i change direction of the wood for another room ?

yes i have done this, i was merely asking if anyone had any ideas of a decent product which is proven but thanks for your positive reply anyway

i have just purchased some oak laminate and wanted to know what options i have, i dont want to remove the skirting board but i want a nice edging I also would like some advise on the door strips, all the obnes i see look cheap, would it be better to put maybe an oak board down first and then...

what do you think on the following process - dpm sheet then peel and stick process ?

no problems with damp at all, the bungalow is 25 years old i just want to make sure i have everything correct

thanks for the info, do i need a membrane ? do i stick the floor to a membrane ?

hi i want to lay 18mm think wooden flooring ( various lengths from 300 mm to 1400 mm ) can anyone advise the best way to lay this as i have only laid laminate before, The floor is concrete and understand i may need a DPM ? ( the floorinf company want about 500 gbp for a sticky DPM -...

would you have a picture of what im looking for ? when i refil is there anything i should be aware of

i have a tank in the loaft and hot water tank