Search results

no slots in the chrome , is it likely to have to strip the toilet down to get underneath to unscrew the fittings ?

Hi All I have a toilet seat I wish to replace as the chrome fittings are peeling and looking awful but its a soft close with hidden fittings and I dint know how to take it off , photo attached Many Thanks

Thanks All I have bought some Gripit wall plugs , GRIPIT PLASTERBOARD FIXINGS 20MM X 205MM 25 PACK (6621P) Screwfix I can get at least 2 in the wall and possibly 2 Fischer 6mm wall plugs and screws so hopefully it will be ok .

what does this mean please Id use a metal gun and ram in deep as you can. When dry cut back.

Hi All, Ive taken down a 24 inch tv and replacing with a 32 inch, so a bit heavier but the tv was fixed onto plasterboard with a deep void behind. It was fixed with...

They just said an internal fault . Leaking from where the base joins the swivel pipe

Ok so I have replaced my tap with a new one from Insinkerator , there isn't any screw holes so you can't get into the tap to dismantle it , I took the tap handles off but you need a special tool to get the cartridge out. So it looks like the new tap was required and could net be repaired. Took...

Mine was 8 years old , how old is yours , I saved £100 by using the promo code

I spoke to Insinkerator support who said it's an internal failing and cannot be repaired , needs replacing. They did send a 20% off promo code to help.

Checked and no hole for any Allen key , do you have to take the hot and cold handles off ?

I cannot see how to remove the spout , the base looks solid

Hi All As title, Insinkerator 3n1 tap is leaking where the cylinder of the tap goes into the main tap see photo , question is can it be repaired if not do I have to use a Insinkerator tap can I buy another hot water tap Thanks

Electrician cut out letter box shape in the ceiling and I have filled in with Easyfill , so after I have rubbed it down do I just paint over it or do I give a coat of Zinnser 123 first ? Thanks

I am after putting my washer and dryer in a unit stacked on top of each other, Is it possible to buy a ready made tall unit to put them and where to buy therm from. thanks

Hi All I have a Eco Tec plus 615 fitted at home that runs 15 radiators inc 3 large column ones in the Kitchen/Dining room. I have been told it's underpowered for 15 rads as its only 15Kwh is that right and ion so what size do I need please. Thanks

Hi, cartridge is 4 months old , not tried alignment as to cleaning how do I do that ? thanks

Yes tried that 3 times but no better

How do you clean them I’ve used the utility tool to clean them but it’s not worked

When printing I get lines missing in the middle of the print. I have used the utility to clean the print heads but I still get the problem, see print any ideas how to fix this please

I was going to connect into existing...