Search results

There must be a better solution to this. 350mm long screws will be ridiculous both to buy and to install. Add the photos of what is being proposed.

The item about the kitchen sockets being 'spurred from a 6mm cable' is useless, as it doesn't explain what the problem is. What size of cable? One cable for both sockets or a separate cable for each? How is the cable / cables installed? Is the problem the socket on a 40A MCB? What exactly is...

The fan is in zone 2. No requirement for a fan to be SELV in zone 2. No requirement for a fan to be SELV in zone 1 either.

True but that only applies to the force exerted on the strike by the lock, as in someone pushing/pulling the door. If the strike can be accessed, it's relatively easy to pry the mechanism and release it. If wiring for the strike can be accessed from outside (such as via an external cheapo...

Electric door strikes are inherently low security. Using a 'high security' lock with one is meaningless. What exactly are you intending to achieve here?

Many consider it entirely feasible and desirable. https://nato-l.com/ https://infrastructurepipeline.org/project/australia-asean-power-link https://xlinks.co/morocco-uk-power-project/ https://gregy-interconnector.gr/index_en.html

Global scale interconnectors are used to bring in power from places where it is windy and/or daytime.

Do not do that. Drill/cut the timber if needed, cable ideally in the corner well below the finished wall surface.

Remove the plinth that the lights are installed into. They are usually just clipped on the cabinet legs so can be pulled off easily.

No. This 'ground' description implies content created for North America. Inappropriate and unrelated. No. Sockets, lighting and other electrical accessories require a protective conductor which connects them to the main earth terminal for the installation. Standard installation practice...

It's a circuit with 3 lights and presumably switches for those 3 lights. Even if all 3 lights and all of the switches were opened for inspection and all of the possible tests were done on all of it, this should be an hour of someone's time at most. What kind of testing could possibly take two...

That is for an electric fan heater which will chew though expensive electricity. The Myson item uses hot water from the central heating system.

New thermostat requires a neutral, which the old one does not have.,

Conduit or trunking, typically used for single insulated conductors. Available in metal or plastic, would be installed before any wiring/cables, and then the wiring would be installed into it. The picture shows flat T&E style cables below the consumer unit which are insulated and sheathed...

It's one or two cables coming out of the floor adjacent to a wall with further cable(s) to where the controller was. or more likely, one or two cables in a wall box where the controller/thermostat would have been located. There should have been another cable for a floor sensor, although that...

In theory. In reality, you only get one chance to get the door aligned to the machine properly as there is no adjustment at all. Then there is the added difficulty where the springs in the dishwasher door are overpowered without the decorative door front installed, so it will slam shut on it's...

Those radio channels are on one or more of the same UHF multiplexes that are used for TV. Unrelated to DAB which is an entirely separate service on different frequencies.

Only if it's intended function is an emergency stop - which it certainly won't be for an aircon unit or most of the other applications they are used for.

That has an FM/DAB receiver, not a TV. FM and DAB frequencies are unrelated to those used by TV, shoving a TV aerial into it isn't likely to work well or at all. It's primary function is to receive audio wirelessly from another device, and as the vast majority of radio stations are available on...

Why do you need to print any invoices at all?