Search results

Thank you guys. I guess it is best to get it replaced with a pull cord switch

Yes, rented

Hi Guys, I have a standard (not the cord one) light switch inside bathroom, it is outside Zone 1 and 2. Will this pass Electrical Safety Certification? Thanks,

Hi guys, I have installed Zenith worktop and the space between the freestanding Gas cooker and the worktop on both sides is only 10mm. I cannot make this space bigger without the major changes. Is there any thermal barrier material I can put between the cooker and the worktop, to stop the...

Thank you guys, appreciate your help.

Hi Guys, I am trying to find a composite door with a window on top, but all suppliers I found make standard frame and door. Are there any suppliers who offer such doors and door frames (see picture)? Or do I need to order a standard door and a small window separately? Thanks,

thanks guys

Hi Guys, Which standard (non TRV) radiator valves are good? I bought Angled Radiator Valves 15mm x ½" from screwfix, but they are quite bad. Hard to turn and a bit short. Same thing in Selco. Are there any decent ones on the market? Thanks,

Thank you guys, appreciate your help with this.

Hi Guys, I have a kitchen from Howdens, the units are white and the doors are cashmere. For the base units there are some End panels, but for the wall units there is nothing which goes on the sides. Should there be any side panels for the wall units, or do they just stay white on the sides...

Thank you guys for your help

Hi guys, Can you please help with one question. If the plate light switch is installed inside the bathroom, but it is 1 meter away from the shower tray and 1,5 meters away from the sink (so it is technically outside zone 2), is this Ok or Not? Is there any guidance which is a NO NO to the 230...

Hi guys, Can you please recommend some good DIY cavity wall insultaion kit. Thanks,

Thanks Andy Any specific reason going for BRASS shank? why not just plastic?

Hi guys, I have an armitage shanks toilet fill valve, recently it has started overflowing, i.e. the valve does not stop the water supply. I have tried: - opening valve and cleaning everything - replacing the diaphragm - replacing the valve completely It is still not stopping the water. Do...

Hi guys, Can you please recommend some Good White paint for Bathroom and Kitchen? In the past I used Leyland K&B and Zinsser Perma-White, both require many coats (at least three), even on light surfaces. Do I need to use special Bathroom Paint, or can I use some Durable Eggshell instead? Thanks,

Hi guys, I have used Dulux internal wood paint, I think it was Satinwood Brilliant White. It was very good, non yellowing and sticks well. Are there any alternatives? Something as good and non yellowing, but cheaper? Dulux comes a bit to expensive when you are repainting the whole house. Thanks,

Does Does any other paint stop the mould growing on outside? Maybe some special liquid I could spray over the wall that works for a few months?

Thank you! bought some Perma-White