Search results

Out of interest, it is obvious where L & N are, I just need to know which are the current thermostat pins?

Echo Understood! Thanks...I'd still like to get the full Schematic though... Kevin

EFL I was just about to type "Legend!" but I see that the Diagram on page 14 does related to the connectors. I have included the manual PCB diagram and a Photo of the PCB - I presume yellow and grey loops are CH and HW loops - the CH loop is the one that needs splitting off to the Nest - but...

Hi I have a Baxi Solo 18 and I bought a Nest Thermostatic controller thinking that the wiring would be obvious but the PCB Diagram in the manual doesn't show the information that I need. I need to know the Live, Neutral and CH pins on the connectors - or a more detailed Wiring diagram so that...

Nick Sounds good - can you recommend Bonding and skim? Regards Kevin

Vinn Thanks for the reply. In answer to your questions, The board is a 4x2 frame for a Sliding Door Wardrobe. I need to plaster up to it. Cavity wall - block and brick. There was a frame there previously, the 4x2 was fixed with Brads which is why the cracks are there I think. The conduit...

Hi During a recent DIY project I dislodged some plaster. I'd like some advice on how to repair the damage, I've never really plastered so I'd like to take a crack at it myself! I believe I need to use Sand/Cement render initially and then skim over it? And Advice would be gratefully received...

Hi A few years ago we had a uPVC Conservatory fitted. The guy who put the uPVC window cills on sealed around the edge and then I am sure he used a chemical on a cloth to harden the sealant, The cills have since settled and I need to redo them - I'd like to harden them off again rather that...

Ian Brutal, by true. All three pipes get hot - can you get the Motor separately? Kevin

Daniel Honeywell. Can I free it up, or should I replace it? Kevin

Chaps Since we tested the Central Heating a few days ago the Radiators heat up despite the CH no longer being switched on. I have wiggled the slider on my two-way Zone Valve and it moves freely - I don't know if that is important. Apart from ripping the Zone valve out - is there anything else...

I have just had my driveway Block paved (Autumn Mix) and was wondering what the recommendation would be for sealing the Paving? It will have two cars parked on it. Seal or not to seal? Regards Kevin

Thanks 45 Years a Gas Man! It's simple when you know the answers :) Regards Kevin

Pulp I don't know if you have resolved this one, but I just spotted it. I self-installed a Swann 4 Camera system from Maplin last year: http://www.maplin.co.uk/p/swann-dvr8-2450-8-channel-cctv-kit-with-4-cameras-a92qz ...although my cameras are less TVL (650) than the ones in the...

Chaps I have an ageing Pottern EP2001 CH Controller which needs the occasional switch on/switch off in order to restore all functionality and I need to replace it. Can someone recommend a direct alternative - not to many wiring surprises! Thanks Kevin

No, not a headboard, it is a back board for a TV to hide Cables etc. What are split battens? Cheers Kevin

Similar to the picture above, I have a back board that is spaced off of a wall by two 30mm strips. I guess I can fix the strips to the board but then I need to fix it to the wall. Alternatively I could fix the strips to the wall and fit the back board to the strips but I am looking for...