Search results

That might be an idea. I was trying to avoid touching the pipes in the area where they are fixed as its sods law its where all 3 MV's are & where pipes go though beams & alike, so would have problems even raising the pipes a few milometers, but can cut into the flow & return.

Hi, thanks for the reply. Unfortunately its a Glowworm sxi30 boiler with a built in pump that couldn't even be removed & mounted remotely. But you opened up other idea's with those clips.

Hi, got a small problem with noise transfer from the boilers pump to ceiling. I have put in my own heating in a bungalow with the boiler & tanks in the loft & pipes dropping down to the rads all done in plastic except for the last 2 meters to the boiler which is in copper. (All is working...

My fault on the tank, we would of had to have a pump fitted for the oil as we couldn't work it on gravity & that added a few hundred with the pump & added electrics. The boiler was a 30kw sealed system basic boiler (none combi) as a 21kw would not have been enough. We where a little lucky on...

I know its an old thread, but i just fitted a boiler for my new central heating system & the boiler cost me £702.00 to buy in comparison to nearly £1500.00 for the oil equivalent. Wile we have a JCB on site we ordered a 2400lt underground tank that cost £407-00 from Avanti gas & will hold 2000lt...

Hi, we are fitting a boiler & are about to fit a 22mm condensation pipe from the boiler to a waste pipe in the bathroom, but the length of run is around 11 meters with a nice slope. What is the maximum length this can be in 22mm?. The only info with the boiler is that on a long run, increase...

Hi, having trouble locating some Texecom Premier ID biscuit's to work with the 60 id expansion card. Are these the same as the Honeywell ones so i could use these instead? Thanks. Chris.

We was looking to issue 4 fobs or individual codes to staff & 1 cleaner & use it for work time sheets. It would of been nice to have kept a longer record as the unit would of also logged other alarm activity's. But i email Texecom again & they said the 1000 log is no longer made. But suggested...

AH! That's who i emailed 1st & they replied as just a very short no. But it seems strange that their paper work for the Premier panels says yes & wondered if i just got a newbie on the job.

Hi, cant seem to find the answer on whether this memory Premier module is still available. It extends the log to 10,000 events & would be real handy for my situation. Has anyone fitted one or seen one. (It apparently fits on the expansion port) Thanks Chris.

Many thanks guys, i think the 48 looks a real good bet with some better expandability from the 24. I noticed that software is available for these units that gives also the opportunity to local & remote access to the panel with windows. Would this give me the possibility of turning the alarm...

Hi, any recommended on alarm panels with a good track record for reliability & expandability (20 zone min) Thanks Chris

I would personally would try to find a qualified electrician that has been recommended by a friend that has had them working in their own house. Just because someone is qualified, doesn’t mean they are good at their work or house trained. I have employed electricians in the past that are...

This might be similar? Just make sure the contactor coils is 220/240 volt.

Hi, we are at the planning stage with a new build & wanted to install a multi fuel log fire with water heating facility’s, that draws its air from outside. The main reason for this, is there will also be a heat recovery ventilation system being installed & didn’t want the log fire sucking the...

Hi, hope you can help. We have recently had the areas water pressure increased dramatically & we are now getting the problem of pipes banging, especially when taps or washing machine valves turn off. Problem is! This is when our neighbour’s taps & machines turn off as we are on a shared main...

[/url] Ah! well done. That "Domestic part" opened up a new world. Thanks.

Having trouble trying to find the maker/supplier of some very common window roller shutters/blinds that looks very much like the roller shutters on garages & shops, (but more refined). The ones that i have seen are very common in France/Italy/Spain & hotter countries. They can be mounted...

Hi, try a place called Massgrove electrical wholesaler's at 13 Brent st, Hendon NW London. Their place was there before the ark & has got me out of trouble a few times. They even have the old original wooden ceiling blocks for light fittings if you need them.(Original) Phone NO: 02082020005 &...