Search results

Thanks I’ll get that wired up and see how it goes. Another question about an internal door contact thats set as final exit doesn’t seem to do anything. Heres my wiring Red going back to Z2 on keypad Black going back to - on keypad Input 74 What my doing wrong? Thanks.

Hello again, So I have 2 white wires (zone) 2 red wires ( tamper) And a blue and green coming from the junction panel. How do I wire this with EOL I have the 6 terminal junction box.

Will 2 wires back to control panel be adequate?

Hi, Heres a few more pics, where you see the rawl plugs the previous owners had a white plastic door contact, Note that I only have a two core running to the garage and cannot run a new cable.

Hi All, I took of the original door contact that was in the garage and bought the below without thinking. https://www.alertelectrical.com/cqr-large-surface-contact-grade-2-white-sc550wh-1.html Now realised the garage door has this metal part so can I still use this door contact and would it...

That’s it sorted thanks.

it’s a 46, does this look ok below? Would like the whole upstairs disarmed at night, input 1 hall is my entry/exit untill I add some door contacts. Downstairs Input 1 - hallway AB Input 2 - dining room AB Input 3 living room AB Input 4 - kitchen AB Upstairs Input 5 - landing A Input 6 -...

Hi All, During the weekend I installed and programmed my pyronix as follows but It doesn’t want to set when arming the whole house (AB) it just says exit via hallway ( which I had set to entry, exit and then tried FX(Area ER) At this point im just not sure what the hallway which is my exit...

Theres 6 cores going from PIR1 to PIR2 and then 6 cores going to panel. I was going to use 4 core with the resistors in the PIRs

Quick question, I have noticed that one PIR is connected to another PIR then one wired goes to the panel, can I replicate this on the pyronix ? And how do I go about this, appreciate its not the best way but I can’t run another wire.

Fair enough thanks

Yeah much easier than running 6 wires per pir

Yes think I got it now yes changing all 5 and adding another 4 now

Thanks

Thanks, so am I correct saying it doesnt need the 12v and 0v then?

This is a picture from a video I took so not the best, it has five pirs and 1 door contact currently.

Thanks for your reply, I have installed euro46 mini before which has 4 wires connected. could you tell me how many wires I need to wire a PIR? 12v, 0v, Z1 from below pic

Thanks Sparky, So I’ve looked at all the kit and now wondering if I can even fit the outputs. How many wired PIRS can even be put on this system? Can 6 x wired pir be fitted Wired keypad Wired bell Wired sounder Wifi digi Wireless expander all in one panel?

Hi all, Want to change my existing wired alarm in my new house so would the following be ok so I can add wireless door contacts and control via app. Anywhere else I can also buy the stuff from? Thanks.

Where can I buy as a non trade then?