Search results

  1. R

    Glue for Engineered Wood Floor

    Hi, I'm hoping someone can suggest a suitable glue for tongue and groove engineered floor. It's reclaimed so I don't know what the manufacturer would advise. It's 22mm thick with 6mm oak surface. Concrete subfloor, planning to use vittrex underlay boards. Any advice much appreciated. Thanks
  2. R

    Reclaimed Parquet Floor

    Hi, I'm planning a parquet floor for the downstairs of my house. I was going to use the standard tiles but I've been given 30m2 of a smaller tile 120x24x7mm - see picture. Does anyone know why they aren't commonly relaid? I can't find anything online about relaying them. Is it just they're...
  3. R

    Boiler Leak while repressurising

    Thank you all for the help. It sounds like I need a new drain/isolation valve then. I'll be more careful in future, it wasn't an axe it was a pair of pliers. It was all I had to hand and there was quite a lot of water comming out. Not that turning it made a difference. Thanks again.
  4. R

    Boiler Leak while repressurising

    Hi sorry I wasn't clear and the photos aren't that helpful. Its the thing to the right of the drain cock that is leaking. I figured out how to put an arrow on the photo now. It can be turned through 90 degrees, I thought it was an open/close valve.Thanks.
  5. R

    Boiler Leak while repressurising

    Hi, A valve on the CH return started leaking while I was repressurising the boiler. This may have been why it needed repressurising but I hadn't realised. Is it possible to easily replace the valve or should I get a plumber to do it? It leaks whatever position its in so I've drained the system...
  6. R

    Smart Thermostat

    Thanks. Worked perfectly.
  7. R

    Smart Thermostat

    Hi, I've bought thermostat that either doesn't have or I can't find a wiring diagram, it looks straightforward but it's not something I'm familiar with. Any help would be much appreciated. It's a Moes bht-002-gclw. My current timer/programmer is a Hortsmann Channel Plus H17XL: Left to right...
  8. R

    Switch to Hive

    Ha thanks very much. I hadn't seen the red wire either.
  9. R

    Switch to Hive

    Thank you. Yes it's a programmer, no thermostat current.
  10. R

    Switch to Hive

    The boiler is an Ideal ISAR HE30.
  11. R

    Switch to Hive

    Hi, I was hoping for some advice about replacing a thermostat. Current model is a Hortsmann Channel Plus H17XL wired as shown in the picture below. Left to right wires are earth, N, L, then numbered 1-6, black wire is in number 4. Wiring diagram - I was trying to understand what I would...
Back
Top