Search results

  1. Tigercubrider

    Factory In China Building New Classic Car Complete Shells

    I watched that video. I don’t think that “made in China” is necessarily a bad thing? Your iPhone and whatever you are looking at this board on are likely made there. The Chinese make what is effectively a Harley Davidson under licence that has a better engine than the model that Harley...
  2. Tigercubrider

    New newels/spindles/rails

    https://www.ironmongerydirect.co.uk/product/zipbolt-qt13-500-kd8-stair-handrail-to-half-newel-post-connector-8-x-90mm-992809?vat=1&GSP=true&gad_source=1&gad_campaignid=22180738972&gbraid=0AAAAAD-uRIT0kAT5XRSOPblx4F5c-XgwZ&gclid=CjwKCAjwidXQBhAZEiwA4egw6Jfe2jIadsKolkCvVWf8oHwP3WD1LPSZpybYq5Ih_fUiP...
  3. Tigercubrider

    New newels/spindles/rails

    When I did a couple, the newels went in first. that involves lifting floorboards and fixing the newel to the underfloor structure. I have used screws and tight woodwork to ensure a wobble free newel Then fit the base as a tight fit and fit the handrail, ensuring the height is level and...
  4. Tigercubrider

    Short bit of ceiling wire chasing

    The important part is depending on the way that the joists/rafters run. If the timbers supporting the plasterboard run in the same direction as the light fitting, you might be able to fish the wire through? Depends on if there are no cross timbers If the timbers run at 90° to the direction of...
  5. Tigercubrider

    Short bit of ceiling wire chasing

    Make a piece of timber as an off stand/plinth. It could be smaller than the fitting or larger. Either pack the plinth to create a channel, or rout a cable channel Fit the light to the plinth then the plinth to the ceiling, using French cable to the ceiling void if necessary. You might be...
  6. Tigercubrider

    Covering concrete garage

    Enlighten us. Fixing timber to the outside using battens is simple. Precast concrete (especially aged concrete) is very hard and you need a decent (Sds) drill.
  7. Tigercubrider

    Disassemble Bed

    Take one screw that connects the metal to timber apart. Look inside the hole to see if there are metal inserts If there are, then you should be good to go If not, you can buy inserts that would go into the existing wood holes, after increasing the original hole. They normally go into a hole...
  8. Tigercubrider

    Disassemble Bed

    Is there no makers name on it.? At least post pictures of the whole thing, then images of the inside bracketry and enough so we could make a guess? Did you buy the bed?
  9. Tigercubrider

    Re-opening front reception room and dining room

    How well do you know your neighbours? Houses of that era tended to all have doors through the wall, and many owners blocked them up at some point or “modernised” it to form an arch. Someone in your road likely still has the original set up and might let you see? Once you understand the original...
  10. Tigercubrider

    Running a cable under a driveway

    Have you already got the chargers with a cable?
  11. Tigercubrider

    How to approach laying a path here

    How large an area? The area shown could be home mixed. But if it goes back 50 feet then it needs a different approach. I tend to agree with slabs.
  12. Tigercubrider

    Where can I buy melamine/laminate sheet ?

    Waterproof or splash proof? Would a solid plastic not be suitable? We used to buy faced ply and buffalo board. Buffalo is used in truck and trailer bases. You still need to worry about edges.
  13. Tigercubrider

    Rotating large man hole cover

    I am no builder, but that looks like a deep shaft with a top layer that’s been added to the original chamber? I would GUESS that the top brickworks could be altered to reorientate the top cover. You might need permission to do this . I know that my shallow drain has been changed at some point...
  14. Tigercubrider

    People need to be prosecuted for this.

    Yes, it’s the “Government’s” problem in that they (the government as an institution, not the administration) because, as Governments do, they react to problems, hardly ever to preempt them. The existing system fault has existed for over 50 years. To suggest that the driving test backlog...
  15. Tigercubrider

    Running a cable under a driveway

    You do realise that it doesn’t need to be plugged in all the time?
  16. Tigercubrider

    People need to be prosecuted for this.

    It does seem bizarre that this has been allowed to happen. However, the OP seems to have gone off one one? Complaining that a legal loophole is being blocked by the government ? Suggesting that if an opposition party gets in then they will block what the government have already announced as a...
  17. Tigercubrider

    Fill gaps around pipes in the floor

    Foam normally sets in contact with water, so using a plant sprayer with the foam helps control the expansion. I’d be tempted to get a kitchen wall cupboard and fit it over all those pipes. Make it without the back, and relieve the base for the pipe work. If you can get the same as your kitchen...
  18. Tigercubrider

    Brighton Bodies

    Could be late night clubbers going for a paddle (possibly not entirely sober?) and one gets into trouble? Others try to help? Pure speculation however.
  19. Tigercubrider

    Why is there a batten behind my cistern?

    My cistern is packed off the wall to allow space for wall tiles.
  20. Tigercubrider

    Brighton Bodies

    I used to spend a week in Brighton once a year for work and stayed in a B&B. The landlady was in a club that started their day with a (very) early morning swim. She always extended an invite to join for a swim that for some reason we never took up. It sounds like the sort of thing that could...
Back
Top