Search results

  1. C

    Poor hot water pressure/flow

    Check the cold isolation tap under the boiler has not been partially shut
  2. C

    Is it possibe to attach a basketball hoop to this wall?

    Use resin or fit a back board up then screw to that
  3. C

    Exposed wall

    If it’s not a support wall could it be replaced with a stud wall
  4. C

    Do I need a vanity unit mounting frame?

    As long as you’re frame is substantial it will hold a vanity no problem
  5. C

    Worcester Greenstar Junior Heat Exchanger - DIY?

    Could be worth a call to see what price Worcester will do if for
  6. C

    Worcester Greenstar Junior Heat Exchanger - DIY?

    It’s definitely a gas safe job as burner fan etc removal,then needs setting up afterwards
  7. C

    Boiler dropping pressure when I turn heating on but returns to normal when off?

    It normal,pump starting causing the alteration
  8. C

    Stopcock handle broken

    Spanner or a adjustable spanner will do it
  9. C

    Is this a TRV valve?

    It’s not a TRV ,yes it could be exchanged for one
  10. C

    Hot Water tank

    Turn cold supply off will it will stop hot after a small amount has run off,no need for a hot isolation valve. On another note it’s a very poor installation that is not to standard.
  11. C

    Recent new bathroom - sealant already mouldy

    Any silicone area that’s left damp will go mouldy ,really needs wiping down after every use.
  12. C

    Two radiators either side of the same wall

    No problem
  13. C

    Thin cracks appearing in latex laid over ufh

    Was the underfloor pressurised befor and during the top covering being laid
  14. C

    Danfoss TP5000 Si (fault finding help, please)

    Think it has a reset built in ,but it sounds like it is failing
  15. C

    Curved downpipe

    Photos would be helpful
  16. C

    Gas fire failed its smoke test. Who to call?

    Looking at the heat staining on the surround it looks like it’s struggling .cheap option is remove and cap off fit a electric one.
  17. C

    Underfloor heating question

    Temperature will effect the pressure .
  18. C

    To swage or use a straight coupler (15mm copper rad pipes)

    Used one going back a few years ,all ok ,but not to sure with the modern copper,personally I’d go with couplings
  19. C

    To swage or use a straight coupler (15mm copper rad pipes)

    Used one going back a few years ,all ok ,but not to sure with the modern copper,personally I’d go with couplings
  20. C

    Honeywell BDR91 to Hive replacement

    Then you need a single channel hive or rewire to use the one you have
Back
Top